Kat 600 forks/tripples/ and brakes in NC

werase643 · February 10, 2009, 03:52:00 PM

same well story

update.....
traded the 750 forks for 600 forks

I have a set of Katana 600 Forks / tripples / master cylinder and calipers
you will need a set of Kat rotors

look like the 750 ones but upper tripple is different
not modified.......

$175 +
or
$150 come get them

utgunslinger13 · February 10, 2009, 04:45:49 PM

never mind, my mistake!

ohgood · February 10, 2009, 05:07:24 PM

finding kat rotors, then new pads, kat front wheel... isn't your price a little high ?

think i've seen kat FE's complete go for around $200.

forgive me if i'm mistaken.

werase643 · February 10, 2009, 07:33:34 PM

yeah last week i found a set of rotors for....30 bucks

i posted the link here for some one else

why would you need a kat front wheel?

http://shop.ebay.com/items/_W0QQ_nkwZkatanaQ20750Q20forksQQ_armrsZ1QQ_fromZR40QQ_mdoZ

don't look very complete to me?

? but i could be wrong

dgyver · February 11, 2009, 06:06:49 AM

Quote from: ohgood on February 10, 2009, 05:07:24 PM
finding kat rotors, then new pads, kat front wheel... isn't your price a little high ?

think i've seen kat FE's complete go for around $200.

forgive me if i'm mistaken.

Kat wheel is the same as the GS.

If you do not like the price, do not bash what is posted.

If someone buys these I have several sets of rotors I will sell cheap.

The Buddha · February 11, 2009, 10:38:00 AM

Buddha dont care ... Its your bike.
Buddha owes you a huge thanks, only way I was able to machine this or weld that was cos you had figured out all the important stuff. Buddha will powdercoat the frame (rather haul it to the man who powdercoated the frame) you make the frame. How is that for an analogy.
Cool.
Buddha.

ohgood · February 11, 2009, 05:16:00 PM

Quote from: dgyver on February 11, 2009, 06:06:49 AM
Quote from: ohgood on February 10, 2009, 05:07:24 PM
finding kat rotors, then new pads, kat front wheel... isn't your price a little high ?

think i've seen kat FE's complete go for around $200.

forgive me if i'm mistaken.

Kat wheel is the same as the GS.

If you do not like the price, do not bash what is posted.

If someone buys these I have several sets of rotors I will sell cheap.

hmm, my tone may have come off poorly, didn't mean to sound like a bash.

bucks1605 · February 11, 2009, 07:12:57 PM

I paid $150 for my 750 f/e which came with warped rotors and which I had to pick up, so I'd say your price is right on.

werase643 · February 16, 2009, 06:10:45 AM

the look of clip ons
the height of regular h-bars

i'll turn up a prettier spacer and paint it black if ya'll want
ready to bolt on

wladziu · February 16, 2009, 07:40:56 PM

Sh!t, werase, where were you when I was putting a new rotor and pads on my FE in December? I'm right over in Greensboro, too.

I bet my new rotor and GS caliper won't fit on this. Would it?
No need to change stem bearings?
Too late now, anyway...
My new springs are in the mail.

werase643 · February 17, 2009, 06:25:52 PM

so i shouldn't tell you about the RF900 front end......

wladziu · February 17, 2009, 07:56:39 PM

meh.

Off by an inch, off by a mile.
If you're strapped for cash, I'll pay you to fix the wiring for my turn signals. I'm too new to get on I-40, though.

werase643 · April 04, 2009, 08:29:15 PM

traded the Katana 750 front end for a Katana 600 front end

glad i didn't mod it to fit a GS only

the 750 forks are same as a 600
the top tripple is different
the stem bolt is longer
the brake hose to the master cyl is longer by about 2 inches

i guess i could post it in a new thread.....

so I have a
Katana 600 forks
Katana 600 brakes
Katana 600 tripples

I still have $200 in them....so $175+shipping or $150 picked up
send the top tripple to Budduh and be ready to go

The Buddha · April 04, 2009, 10:47:42 PM

Nope, budd - duh isn't taking triples.
Carrier brackets are getting made and will be sent out, nothing comes to me, had enough crap happen, shiete clobbers other sheite. Sheite gets in the way of other sheite, and worst of all, the joker put some crap in the threads. Mind you its very thin there and any extra heat will melt it and collapse the threads, he didn't do that, that he did very skillfully but something got splattered inside the threads and left little burn marks ... Like he missed pointing the handle int the gap where the peices need fused ...
I was able to clean it, but I am not too comfortabe using or selling it.

No more BS, it burns the top coating, then I have to powdercoat it else it looks like it got caramelised ...

BTW you want your GSXR tail or what

Cool.
Buddha.

werase643 · April 05, 2009, 09:32:28 AM

yeah we need to go out for fud in salisbury one night

i'll trade you $ for part

The Buddha · April 05, 2009, 07:00:38 PM

Quote from: werase643 on April 05, 2009, 09:32:28 AM
yeah we need to go out for fud in salisbury one night

i'll trade you $ for part

Yes ...

No $ needed.
Cool.
Buddha.

average · April 06, 2009, 12:20:46 PM

Ken, I need another tar for my Kat wheel. Name your price.

Diaz

News:

Kat 600 forks/tripples/ and brakes in NC