Air/Fuel Mixture screw on '04 carbs

[bassmechanicsz]

this is probably in a another post but i just spent the last hour trying to find a picture of where this is located on my carbs but the only threads i have found the pictures no longer work.  Does anyone have a picture of where i can find this screw on my carbs.  Mine are different than the carbs pictured in the poor man's rejetting also or else i would have just used that.

Thanks.

[5thAve]

I have the older, two-circuit carbs (1989-2002?) and I haven't worked on the newer ones, but I think it's in the same place??  On the underside of the carb, dead centre, just ahead of the float bowl. On the U.S. model carbs, the hole is plugged by a small brass plug. Thank the E.P.A. for that.  You can drill out the plug quite easily (but carefully) and then you can adjust the "air jet" screw.

[Suzuki Stevo]

As 5thAve stated, I believe you will find the screw here...

[5thAve]

thanks for the photo, Stevo

[Suzuki Stevo]

thanks for the photo, Stevo

Thank the person I robbed the photo from *lol* 

[bassmechanicsz]

Don't want to accidentaly take out the wrong cap.  I believe the one on the bottom of the picture is the correct one to drill out.  Can someone please confirm.  Thanks

[respite]

That would be the one.

[bassmechanicsz]

thanks for the quick reply now back to the garage to try to get them out.