News:

Need a manual?  Buy a Clymer manual Here

Main Menu

To bore or not to bore?

Started by Jenya, April 23, 2009, 03:14:47 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

dgyver

#20
May 10, 2009, 03:50:51 AM
You have to have a tolerance, otherwise you will not want to pay for a 0 tolerance.

The piston to cylinder clearance is the important part. Pistons are not exatly the same diameter, especially used. They will oblong with use. Too much oblong and the piston should be replaced.

The bore required is determined by measuring the piston.
Common sense in not very common.
Print
Go Up Pages 1 2
User actions
SMF spam blocked by CleanTalk