my katana frontend install

[jeremy_nash]

installed my katana frontend today.  didn't take any inprogress pics, but have a few of what it looks like now









yep, no gauges for now, but after I sell my old 89 clipons, there is a veypor with my name on it

[jeremy_nash]

for a spacer for the longer stem, I took the needle bearings off the inner race, and used it upside down between the bearing and the stem nut, looks nice and clean

[average]

Looks good but the light looks really low; like vespa low. And are you running clear fuel lines? Any pics of how you used the bearings; kinda want to see what that looks like.

[jeremy_nash]

the light is 1/8th of an inch from touching the ignition.  the universal headlight mount doesn't stick out very far.  going on a ride today, and will post pics of my steering spacer when I return

[Jay_wolf]

i mounted the stock guages to the kat front end

[jserio]

nice bike. 

[xhyperxshogunx]

looking good, especially the fat tire at the back!

[jeremy_nash]

here are the pics of my "spacer"

and the dust seal is solidly in there, so I forsee no problems with it.