carb rebuild = revs slow to come back down

[mattress]

i don't know what the tech term is, but I bought a couple of carb rebuild kits from partsnmore.com

after installing the kit, and putting the bike all back together, i started her up

when I rev the throttle, the revs are really slow to come back down to idle.


you guys have any ideas what this could be? 
no i didn't lose the "tiny o-ring" in the cap for the vaccuum test ports (this time atleast   that was the whole reason for me to buy the rebuild kits, plus i lost a float needle some how)

thanks for the advice!

[utgunslinger13]

Did you route the throttle cable correctly?  Maybe is snagged on something and not closing the butterflies properly?  Nothing hanging up in the carbs?

[mattress]

I replaced the grip could that have anything to do with it? Do I need to lube the cables? Could a vacuum leak cause it?

[utgunslinger13]

not to sure about the vacum leak, but I would make sure that none of the cables are binding.

[marc]

What's the bike behavior?
Does it pull fine? or it sputters and lacks of power completely?

[joshr08]

read this...............http://gstwins.com/gsboard/index.php?topic=41199.0