News:

Need a manual?  Buy a Clymer manual Here

Main Menu

rejet done

Started by johnny ro, February 14, 2010, 03:48:06 PM

Previous topic - Next topic

johnny ro

took several hours scattered across 2 months of winter weekends.

Worst hang up, understanding tank petcock. It seems its off-on-off as you go from one side to middle to other side with the screwdriver. Also gas lines are weird, the idea they are not same size on both ends is bad idea. And too short.

Proud that my eyeball balance on bench was correct within 1/8 turn of screwdriver when hooked up to gages.

Next step, forks. Sonic springs and 15 wt oil.

The Buddha

Eyeball is more accurate, 1/8 turn after guages may mean one cyl pulling more vacuum than other.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

dauphinc

I as well was wondering about the tank petcock..what's up with that craziness?
Also, on which line is it that the line is smaller on one end? What year bike do you have?
F-->E conversion w/dual dominators..fatter jets..
"It is not the length of life, but the depth of life."
-H.D. Thoreau
"Why do you look so sad and forsaken, when one door is closed, don't you know other is open?"
-Bob Marley and the Wailers

SMF spam blocked by CleanTalk