News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Question for seshadri_srinath

Started by 96gs, October 17, 2003, 06:13:27 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

96gs

October 17, 2003, 06:13:27 AM
do you own i bike shop or something? i read your posts and you sometimes include what bikes you have or have had. i just wanted to know. do you actually own these bikes or do you own a shop that sells these bikes?
1996 Suzuki GS500E
Cobra F1R Slip-On Pipe (Polished)
K&N Replacement Air Filter
Gel-Seat
NC F-16 Fairing
LP Footpegs
Progressive Fork Springs
Katana 600 Rear Shock

http://www.geocities.com/sdhinton2007/MY_WEB_PAGE.html

The Buddha

#1
October 17, 2003, 07:21:48 AM
Nope...
I take in wayward, destitute, injured motorcycles and bring them back to health... then ride the living daylights out of them...
My first attempt at seelling anything just as a selling deal not some I bought to work on/ride/fix/look and now it just adds to the clutter... are the fork braces, handle bars and the case covers. The first one is a disaster... the second one needs resustication, and the third a roaring success... Never thought that would be the order. But bike were bought to be used...
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

ginovega

#2
October 17, 2003, 09:46:05 AM
Yes. I've been there he has about 10 bikes of those 5 run I think. But he is good mechanic when he do not get bad spack plugs. JAJAJAJA!!!!

Gino
Freedom is not free, always remember those who fought and gave their lives for it!!!!
La libertad no es gratis, siempre recuerda aquellos que pelearon y dieron sus vidas para defenderla!!!!!!

Moose

#3
October 17, 2003, 10:05:49 AM
Quote from: ginovegaBut he is good mechanic when he do not get bad spack plugs. JAJAJAJA!!!!
Man gino thats cold.  :?
Of All The Things I`ve Lost I Miss My Mind The Most

The Buddha

#4
October 17, 2003, 10:39:08 AM
The Gino bike ran when I saw it last (after dond carbs were put in it) at gino's place, and the stock pipe was on it still. Gino swapped the pipes with the new V&H he got after I left his place... and he said it still started and ran but ran badly, and after a few tries it didn't start at all... Later I traced that to the left carb float level being very very high... But after that Gino changed the oil and plugs, and still didn't start... That made it harder to guess it was the plugs... The plugs being shiny and new looking should have tipped me off to the fact that they may be changed cos they didn't look like it had any running time on them. Anyway The Gino bike also has eyeball synched carbs, and has a smooth low end/idle, the 6mm 150 mains, both holes open on the diaphragm and 37.5 pilots. In short... the opposite of what I recomend ... but cant argue with the results... it runs great. BTW it has 4.5 turns on air screw, so 40 pilots may be in its future.
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

werase643

#5
October 17, 2003, 05:36:19 PM
Srinath....you ONLY have 10 bikes..... :roll:  :roll:  :roll:
want Iain's money to support my butt in kens shop
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk