96 gs500e parts for sale

[raivis]

UPDATE:::: CLIP ON BARS ARE OFFICALLY FOR SALE!!!   i must note that i noticed tonight that on the throttle side the screw that would hold the bar end is broke off inside.  also the clutch side bar end is bend causeing it not to come out easy.   nothing thats not easy fix but wanted to inform everyone before hand.  since alot of people have asked about them im guessing ill take the highest offer?[/font]


i have some parts off a gs 500e 1996:

frame with swing arm good condition looks straight.  odometer says about 1300 miles  have title

seat good condition one small hole.  maybe as big as a quarter.

possably clip on handle bars with triple tree.  depends on if my friend decides to use them for his kawasaki

turn signals with mounts

full front ant rear brake set ups

electrical switches- horn,turn, kill switch etc...

left rear fairing- small crack

center rear fairing piece  one clip part under neath is broken but im guessing it would still be useable

i know ill have some other parts soon.    all parts will be best offer

location is williamsburg va 23188     thanks for looking

[hubskadub]

Do you have gauges?  I need the whole gauge set for mechanical tach setup for my 95.

Let me know and I'll make an offer.

Thanks!!!

[Norcon]

did your friend take the clipons?

[Focer]

headlight?

[steitsma]

gas tank??

[raivis]

tach is sold  speed-o still available

clips ons still undecided.

no headlight.

no tank.

[Norcon]

how about speedo and tach buckets?

or the speedo cluster silver thing:



sorry for the hack job pic.

[raivis]

buckets are cracked, but if you can do fiberglass work its fixable.  silver cluster trim is there a little bent and rusted. if ur painting it it is easy clean up

[Focer]

LOLOLOL 

[Porkchop]

Do you have a frame mounted petcock?

-Porkchop

[raivis]

nope using that.     what i have listed is what i have at the moment

[Focer]

Do you have a frame mounted petcock?

-Porkchop

this guy had one..

http://gstwins.com/gsboard/index.php?topic=52011.0

[StrikeOut73]

Have the clip ons be decided upon yet?

[Norcon]

we may have to fight for it if its available..

[harlight]

I need the signal generator assy otherwise known as the crank trigger or ignition pickups.
Located under the round cover on engine's right side.

[raivis]

ok that i can do.  i hate to part out the motor but since no one had shown interest in it as a unit ill do it.  i will need to know exactly which parts go with that  maybe use the diagram on bike bandit to figure it out.   also make offer.  just please be reasonable

[gregvhen]

Is the cylinder head good? PM sent

[harlight]

Ths signal Generator assy is round with two magnetic pickups behind/underneath the round cover on the engine's right side.  Two main phillips machine screws and then a smaller phillips hex secures the green wire to the oil pressure sensor.  Only three screws, and detach along with 3 1/2 foot wire leading to the CDI box on the bike's left side underneath plastic side moulding.  Simply separate the 4-prong electrical connection and its ready to ship.  How bout $23.00 shipped?  You can pm me.  Thx

[raivis]

UPDATED ORIGINAL POST!!!