buttoning up the carbs

[jiggersplat]

is there a trick to getting the diaphragms seated properly when putting the caps back on?

[Lars]

should be going almost by itself. At least in my carbs it lines up perfectly. Just Put the rubber lip into the groove that's in the carb.

[jiggersplat]

the diaphragms seems to be a tad bit smaller than the grooves in the carbs.  if i try and stretch one side over, invariably the other side pops up.  i can sorta hold them all down, and get the cap on, but it's a bit precarious.

[miket]

Mine were like that too. Putting the cap on forced them into the groove. At least, that's what happened with mine.

[The Buddha]

If you have them dry... they are a bit too small, if they are soaked in gas they swell up and are too big... I guess you know the answer by now. Put it in gas and let it soak up a little and then try it.
Cool.
Srinath.