News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

3000 rpm idle?

Started by LetsBeFriends, August 12, 2010, 12:28:51 PM

Previous topic - Next topic

LetsBeFriends

I noticed the other day that when the bike is warmed up but not yet ridden, it idles at about 1200 rpm, however once i go out and run around for a while i will come to a stop light, and unless i engage 1st gear a little bit after i have come to a stop, the engine will keep its self at around 3000 rpms, after about 30 seconds it will eventually start to fall but it will never go below 1800 rpms.                        Any thoughts???

pandymai

hanging idle. it's all over the faq and this forum. possible issues are generally the following, in no particular order:

adjust idle
check for vacuum leak (rubber boots tend to crack if they are old or left long periods of time outside)
check valve clearances
check throttle cable alignment

rustbucket on wheels that go vroom vroom and stuff.

Quote from: Homer on July 08, 2010, 08:34:38 PM
If this freshershest-thread-ever gets spoiled by petty fighting, I'm gonna be so mad.  

romulux

Quote from: LetsBeFriends on August 12, 2010, 12:28:51 PM
I noticed the other day that when the bike is warmed up but not yet ridden, it idles at about 1200 rpm, however once i go out and run around for a while i will come to a stop light, and unless i engage 1st gear a little bit after i have come to a stop, the engine will keep its self at around 3000 rpms, after about 30 seconds it will eventually start to fall but it will never go below 1800 rpms.                        Any thoughts???

It's unlikely that it's actually "warmed up" if you haven't ridden it anywhere yet.

Go ride for 10 or 20 minutes, then adjust the idle.
GS500K1

I don't know anything about anything.  Follow suggestions found on the internet at your own risk.

LetsBeFriends

thanks for the help i will give those a once over.

SMF spam blocked by CleanTalk