News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

Which Cap

Started by ChemDog, February 07, 2011, 06:41:05 PM

Previous topic - Next topic

ChemDog

Does anyone know if a gas cap off of another bike will fit the GS??  I have a cap off of a katanna that I got for cheap but it doesnt match the bolt holes (unless I am just dumb).  The tank I have is a newer style tank (thanks to TBolt :thumb:)  I thought I had scored a deal with the kat stuff because I got the cap and the seat lock for like 5 bucks.  The seat lock worked just fine so I thought I was good untill I went to install the cap. 

adidasguy

I found this smiley and just had to use it.........


tb0lt

Quote from: ChemDog on February 07, 2011, 06:41:05 PM
The tank I have is a newer style tank (thanks to TBolt :thumb:)

You are welcome.  :cheers:
I'm pretty sure thats the older style tank :) ... unless there are 3 gens of tanks.

adidasguy

#3
Old and new GS500 tanks take the same gas cap. They use 4 bolts to hold it on. The spacing of the bolts you see on it are for 8 bolts and half of the bolts are there just for looks. Like this one:


On some with a hinged cap, the bottom bolt (a fake bolt) may not be there because the hinge is there. As you can see here:


Anyway, it is considered an 8 bolt cap. There are 5 bolt caps where the spacing is not the same.
Any Suzuki 8 bolt cap should fit.  (May be referred to an "8 or 7 bolt cap" as the one bolt may be missing because of the hinge, as shown above)

PHOTOS of your cap?



burning1

adidasguy,

I haven't seen many screw on caps like that for the GS500. Where can I find something like the one in your photo?

adidasguy


SMF spam blocked by CleanTalk