News:

Need a manual?  Buy a Clymer manual Here

Main Menu

79 honda cm185

Started by mach1, February 11, 2011, 06:18:37 PM

Previous topic - Next topic

mach1

So I got around to repainting this thing. I went with a metallic black, The PO did a horrible job trying to paint the tank and side panels so alot of defects I could not remove. but al in all it looks great. need to repaint the frame and re-chrome the rest.






Just need to wetsand the clear(during the clips parts were not cleared yet) and buff the parts out.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

Adfalchius

It's coming along!  Could you let me know how much you end up spending with the chrome job?  I'm thinking about my twinstar for the future.  One thing sure stands out...the seat looks brand new- the same with mine.  It's been outside and neglected, but that seat sure is durable!
1981 Honda CM200t
1995 Suzuki GS500E
2007 Suzuki DR200se

mach1

i will do a parts list for this project. and update as needed.
Paint and sand paper 35-40$
battery and battery acid 30$
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

The Buddha

Quote from: mach1 on February 11, 2011, 11:20:08 PM

This is the bike needs some work but still in good shape just been sitting for some time.



Oooo Mach1 - Could you measure the tank front to back for me please, is it under ~14-15 inches.
Thanks.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

mach1

No Sorry its around 19inches front front to back. I wonder if a GS motor would fit this frame since both are twins.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

Big Rich

Only if you cut the frame out and add a GS frame in its place. Early Honda frames aren't very sturdy to begin with and the added weight and power (laugh if you must) of a GS motor would probably make a pretzel out of it.

What about a cm250 motor? I think even the cm400 would be way too big.
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

mach1

So Im trying to figure out how this bike will looks with the front and rear fenders seat trim and seat rack painted to match the tank like a modern look and good MS paint of photoshopers wanna lend me a hand. I need to see if it would look ok before I sand the chrome down.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

yamahonkawazuki

3 minute quickie lol sorry

Jan 14 2010 0310 I miss you mom
Vielen dank Patrick. Vielen dank
".
A proud Mormon
"if you come in with the bottom of your cast black,
neither one of us will be happy"- Alan Silverman MD

noiseguy

Ick. It's a 70's bike. It should keep the chrome unless the chrome is shot.

I see painted chrome parts, it tells me chrome was rusted and owner was too cheap to replace / replate.
1990 GS500E: .80 kg/mm springs, '02 Katana 600 rear shock, HEL front line, '02 CBR1000R rectifier, Buddha re-jet, ignition cover, fork brace: SOLD

mach1

I can gt them chromed with no issues. thereaonI wat to paint them is for a more modern look. nothing more nothing less. I think Im going to get another set and paint them and re-chrome these.
04Gs,fenderectomy,V&H Full exhaust,Vortex clip-ons.13t front sprocket.,Uni Pods,22.5/65/147.5,Katana rear shock,M-1 metzeler 150 rear tire,Yamaha R6 Tail-SOLD
79 Honda CM185t-In restoration mode with this bike.DEAD slammed 2003 Honda Shadow 600, matte black everything 18inch ape hangers

yamahonkawazuki

Quote from: mach1 on April 23, 2011, 07:06:23 PM
I can gt them chromed with no issues. thereaonI wat to paint them is for a more modern look. nothing more nothing less. I think Im going to get another set and paint them and re-chrome these.
parts swappable in an hours time :)
Jan 14 2010 0310 I miss you mom
Vielen dank Patrick. Vielen dank
".
A proud Mormon
"if you come in with the bottom of your cast black,
neither one of us will be happy"- Alan Silverman MD

SMF spam blocked by CleanTalk