News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

Bike cutting off!

Started by ttpakasnipe, March 21, 2011, 05:15:54 AM

Previous topic - Next topic

ttpakasnipe

Ok, guys....

I don't THINK the fuel lines are switched, but I could be wrong...

Either way, when I turn the petcock to 'ON' and ride for a few mins, it'll turn off.... But when I turn it to 'PRI', she runs like a champ. I don't mind running PRI except that it also seems to use reserve when I run prime....

Do you guy have any idea what could cause the problem??

Thanks,
James
------------------------------------------------
2005 GS500F... Dynojetted, fenderectomy, custom rattle can paint, jardine rt-one exhaust, 14t sprocket, ngk iridium ix plugs, k&n drop in

2003 mustang GT

"Be the change you want to see in the world"

MrTwinkle

Does it work while in RES?
If not there might be a problem with the vacuum hose?

ttpakasnipe

I checked the vacuum hose, it looks fine

I recently Rejetted the carb, unfortunatly, didn't use Buddha's stuff...

It will not run on RES any longer than ON...

I don't want to keep running in PRIME because I don't want to flood the carbs or anything along the lines.

Also, I seem to be getting terrible gas mileage recently, under 30mpg, normal driving.

I'm willing to take a road trip in NC, lower VA if someone wants to help fix this!
------------------------------------------------
2005 GS500F... Dynojetted, fenderectomy, custom rattle can paint, jardine rt-one exhaust, 14t sprocket, ngk iridium ix plugs, k&n drop in

2003 mustang GT

"Be the change you want to see in the world"

BaltimoreGS

That fuel mileage is really low, are you sure it is running on both cylinders?

-Jessie

kman

it sounds like something may be hooked up wrong after you worked on it.  When it is running does it seem like it is rich?  do the spark plugs look ok?

ttpakasnipe

Actually, I was wrong about fuel mileage, it's getting around 50...

It doesn't run rich or anything, everything is normal, except the petcock..

I tried working on it yesterday and everything looks fine.
------------------------------------------------
2005 GS500F... Dynojetted, fenderectomy, custom rattle can paint, jardine rt-one exhaust, 14t sprocket, ngk iridium ix plugs, k&n drop in

2003 mustang GT

"Be the change you want to see in the world"

The Buddha

Yea this is a petcock/vacuum line issue looks like.
PM comming your way.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

skirecs

the previous owner of my bike put the back of the petcock on upsidedown, so when bolted to the frame the vacuum nipple faced rearward

i guess he couldn't figure out his mistake because he just left the vacuum line uncapped...

SMF spam blocked by CleanTalk