For Sale 99 Katana 600 Rear Shock

[reload]

Pretty good condition. I'm not using it anymore.

Asking 20$ + shipping.

[deandancemachine]

PM Sent. This will bolt right up with the stock hardware correct?

[reload]

yeh bolts right up. you have to remove the seat, tank, fairings, and airbox to get to it. then its plug and play.

[The Buddha]

yeh bolts right up. you have to remove the seat, tank, fairings, and airbox to get to it. then its plug and play.

No you dont.
You can almost get it from under ... what prevents that from happening is mainly the lack of ground clearance.
So you park the bike on a concrete block and weight down the front. Unbolt both the shock bolts and the center linkage bolt.
Heck take off the linkage and shave it where the clevise goes, just in case.
Anyway loose linkage will let the shock drop out the bottom.

Yes the linkage bolts will be F^(king tight, as will the shock bolts and they are the self locking type, so you better not venture into this without an air wrench on hand, or atleast a strong helper. Or you could take it to a shop, have them loosen it 1/2 thread and ride it home, then you could just take it all off and replace it.

Cool.
Buddha.

[reload]

good to know, never tried it from under.  i had my bike apart at the time anyway

[NickyNumbers]

about 6 hours before this posting, i paid 60 bucks shipped on ebay!  DAMN!


gl with the sale

[reload]

sold