News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

'02 GS500 Stalls in 1st Gear

Started by g.brooker, June 10, 2011, 04:38:08 PM

Previous topic - Next topic

g.brooker

The '02 stalls in 1st gear? I have to throttle up the rpms otherwise she stalls out. Going from 2nd to 3rd is seems she is starving for fuel. She idles just fine. Could this be caused by a fuel related carburetor adjustment?

Thanks

joshr08

try running your bike on prime one time see if it still does it or not.  if it doesnt do it anymore your petcock is crapping out or you have a vac leak to the petcock.  very common on the gs's 
05 GS500F
mods
k&n air filter,pro grip gel grips,removed grab handle,pro grip carbin fiber tank pad,14/45 sprockets RK X-oring Chain, Kat rear shock swap and Kat rear wheel swap 160/60-17 Shinko raven rear 120/60-17 front matching set polished and painted rims

Jared

#2
What rpm's are you trying to slip the clutch out  at? The Gs makes little power under  3k.

Did the bike sit unused for a long period of time?
When the 2nd Amendment is lost, the rest will soon follow.

Torque is LBs-FT Damn it.
Yeah that was me.    One of my rides

g.brooker

Thanks to all for your input.

I found the problem.  When I removed the diaphragm I pushed up on the Jet Needle and found it to be stuck and not moving freely up and down.  One of the Jet Needle washers wasn't installed correctly by Long Beach Motor Sports when I had the carbs rebuilt. The washer was laying next to the Jet Needle and not through it. I put it on and know she runs great.


SMF spam blocked by CleanTalk