Powdercoating the Engine Covers > Heat Concerns

[illenium]

Hi Guys,

has anyone here experience with powercoating the engine casings
on the GS500, i have seen it on bikes with liquid cooled engines but not
a GS, i'm a bit concerned the bike will get to hot and re-melt the powder.

I bought a GS in December with engine damage and replaced the whole
motor, i want to coat the casings (eventually the cylinder also) of the old
one after the broken internals.

Any input is much appreciated  

[mach1]

If High temp paint works assume PC should be fine.

[ben2go]

No issues with PC.Just make sure that who ever does it mask off the mating surfaces and uses silicone plugs in the passages and bolt holes.