News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

WTB: Couple engine parts

Started by adidasguy, August 01, 2011, 12:55:11 PM

Previous topic - Next topic

adidasguy

Starter motor?
Oil cooler?
Signal generator? Maybe the rotor for the signal generator if it is from an older engine, since it is going on a 2006 motor, and I think there is a difference.

Guess we also need oil cooler lines and an oil radiator.

dgyver

I have a 04 oil cooler in great condition.  I do not recall if I have the lines. I will check by Wednesday evening if interested.
$25 + shipping

I may have an extra starter. I will check as well. If i do...
$15 + shipping



FYI... the signal generator changed in 04 to a single pickup. 
Common sense in not very common.

adidasguy

Oil cooler is cheaper than fleabay and I'd rather support board members. So yes - interested even if you don't have the lines, as the lines are easy to come by. The radiator part is hard to find.
I've had an offer for a free starter, but it wouldn't hurt to have a spare. With all our bikes, we don't have a spare starter. We like to have at least one of all the important things on the shelf - just in case.

We're going to use an 89 frame and I think it has the wiring harness. So we have to decide whether we'll wire as an 89 or move that harness to another bike with a fuggled harness to make it better and get a new harness. If we go as 89, then we'll have to change the rotor and the pickup. If we get an 04+ pickup cheap, we can buy a new harness and transplant the 89 harness to one of the other bikes. (We really re-use and re-cycle parts like crazy) It will get the older carbs since we have a couple sets to make one good working set of carbs. For city commuting, so new or old carbs will be fine.

adidasguy

Besides oil cooler and starter, I don't think there is much else missing except for the clutch pushrod and the cover (I have the cover).
See anything else missing? (have starter cover, and bolt from bottom oil pan)





dgyver

I should have an extra clutch push rod as well. I am off Wed night and will look for the parts then.
Common sense in not very common.

dgyver

Got the oil cooler... but I do not have the lines.
Found extra clutch push rod.
No go on an extra starter... sorry.
Common sense in not very common.

adidasguy

These will help. PM me total and your paypal account or if you want a check.
Oil lines are all over ebay so we'll be OK there. The oil cooler is hard to locate. Maybe because they get damaged easily.
Thanks.

afterbooster

89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

adidasguy

Can use starter. We have no spares in our stockpile of parts.
I found that the The engine has the signal generator. It is a 2006 engine going in a 1989 frame. We probably should keep the same sig gen and run it as a 2006 rather than try to change it to an older type engine. Though it might be handy to have one on the shelf for all our older bikes. We like to have a spare of everything - "just in case". So PM me what you want for them.

SMF spam blocked by CleanTalk