News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

GS500 Race bike in MN 900 bucks!

Started by Strider, October 16, 2010, 11:09:25 PM

Previous topic - Next topic

Strider

Here is a abbreviated list of what you get for your bling.  There is so much stuff that I don't even know what all is there honestly.  I am not interested in parting out anything.  If you want some parts, buy the whole lot and part out the rest ;D.  Allow me to rephrase, I'm not parting this out!  Possible transport partial transport available.  Another side note, the main bike is drilled already for saftey wiring. 
PM me or E-mail me Strider@c3motorsports.org  :thumb:

Works Shock
Fox Shock
2 frames
2 sets of race tech emulators
2 sets of race tech springs .85 and .90
1.5 sets vortex clip ons
2 lower belly pans (for racing)
1 set woodcraft rear sets (also have parts to make a linkage for the shift rod if interested in the mod)
2 rear tailsections
braided lines
4" rear bandit wheel (makes the rear tire profile better)
couple set of stock wheels
ebc brake rotor (new in box)
spare engine parts
spare engine
spare oem parts (probably enough to make a bike or two)
pitbull rear stand
pitbull front stand (with gs pin)
junky rear stand
yosh pipe
BT003RS Bridgestone tires with plenty of life left
99-03 R6 Sharkskinz body work and a Napa Fiber glass repair kit.
Stomp grips
ASV brake lever
upgraded fork brace
The forks were rebuilt this year, and a new generation R6 rear shock has been installed as well.  The shock had a hand full of miles on it before it was removed then sold to me.  I recently replaced the gaskets and cleaned the carbs.  I had help with that but its started to run funny and I can't figure it out.  Someone that knows something about carbs I'm sure can figure it out.  I don't have the time to work on its anymore and need the space back in my garage!!!!



Doug "Strider" Jurcich
Arrows Motorsports blog
CRA/ZARS #78
Sponsors:
Zalusky Advanced Riding School and Track Days
Simmer Designs Web and print

Anaconda

hm..i reread your post, so i guess you can ignore my PM since you're not parting

Strider

Doug "Strider" Jurcich
Arrows Motorsports blog
CRA/ZARS #78
Sponsors:
Zalusky Advanced Riding School and Track Days
Simmer Designs Web and print

Strider

There seems to be a little bit of confusion.  The Purchase of this package includes everything pictured.  The mountain of spares, spare chassis, and running track bike.
Doug "Strider" Jurcich
Arrows Motorsports blog
CRA/ZARS #78
Sponsors:
Zalusky Advanced Riding School and Track Days
Simmer Designs Web and print

Strider

Doug "Strider" Jurcich
Arrows Motorsports blog
CRA/ZARS #78
Sponsors:
Zalusky Advanced Riding School and Track Days
Simmer Designs Web and print

Strider

Rise from your grave!! 

900 bucks for the whole wad folks!
Doug "Strider" Jurcich
Arrows Motorsports blog
CRA/ZARS #78
Sponsors:
Zalusky Advanced Riding School and Track Days
Simmer Designs Web and print

mike__R

Where in MN?  Also do you have a title for any/all of the frames?
1995 GS500 on a 2000 frame with F front added
2001 SV650S
2008 VTX1800F
1975 CL360

SMF spam blocked by CleanTalk