FS: front brake cyl with rubber line, brake caliper and lever (not damaged/bent)

Started by afterbooster, September 26, 2011, 11:39:56 AM

Previous topic - Next topic

afterbooster

89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

markglasgow


adidasguy

Even though the 89 was different, it will work. Been there - changed them out.
Only thing to watch out for is the brake switch connection. Be sure it isn't hitting the bar clips. If so, just bend them a little. If they are touching, you can fry your fuse when you pull in the brake as that will be a direct short from the brake switch +12 to the frame ground. (not been there, but a friend did it and I was there so I know to always check that)


afterbooster

89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

markglasgow

$$ was sent. Please ship to Allstate Insurance c/o Amie Glasgow 1705 Simmons Street Alexandria, LA 71301.

Thanks,

Mark Glasgow

afterbooster

89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

SMF spam blocked by CleanTalk