News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

wanted parts list.

Started by oz353, November 13, 2011, 08:33:56 AM

Previous topic - Next topic

oz353

so far i have determined that i need the following parts...
left rear set and foot peg {looking for silver bracket}
replacement clip on bar tubes
kill/start switch assembly including throttle tube
adjuster screw for clutch (on perch)
front/rear brake rotors and pads {nix this ladies n gents, going with spankin new}
rear wheel (white)
shift lever
tach cable
left fork reflector and bracket
guage pod, bracket, and damper rings (speedo and tach appear ok.)
mirrors (pref bar end mirrors)
side stand and springs
rear axle bolt and nut (got ground down badly when po laid down)
carb gasket kit
battery
stator cover (and possibly stator)
oil & air filters
fork oil (not leaking, just awfully soft. bottoming out throwing my weight {170 lbs} on front end) may need to do a rebuild on the fork
rear fairings (pref white)
maybe a choke cable

well so far thats all that i can spy. let me know what ya got!
'92 GS500E
'89 US factory clip ons
RELOAD fork brace
Bridgestone S20R evo tires 110/70 17 140/70 17
.85 sonic springs & Bel ray fork oil
K&N Lunchbox & rejetted carbs
Vance and Hines full exhaust
Suzuki GSXR600 750 TL 1000 - REAR FOOT PEGS as found on gstwinswiki
R6 rear shock

Trwhouse

Hi,
I've got a rear rotor if you want it.
It's not perfect, but is usable.
I bought it as a spare, but really don't need to keep it.
It's $25 plus shipping, which is what I paid.
I can send photos to you if you send me an email address.
Let me know,
Trwhouse  :)
1991 GS500E owner

steezin_and_wheezin

i have all of these;
left rear set and foot peg
shift lever
side stand and springs
rear axle bolt and nut (got ground down badly when po laid down)
battery

sent ya a pm!
if yer binders ain't squeakin, you ain't tweakin!

afterbooster

#3
shot ya a PM, I have most of this stuff
89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

rayshon

so basically you need everything  :D

kidding kidding...i'd get a battery new

adidasguy

West coast parts whore here. When other parts whores are finished with you, let me know what you still need.
I do have OEM bars and 20 or so sets of tail plastics.
Been busy sorting parts in the Bike Cave today. Gotta get organized for 2 bike builds now.

weedahoe

Ive got

kill/start switch assembly including throttle tube
front/rear brake rotors and pads
rear wheel but blue
2007
K&N Lunchbox
20/62.5/142.5
chromed pegs
R6 shock
89 aluminum knuckle
Lowering links
Bar mirrors w/LEDs
rear LED turns
89 clip ons
Dual Yoshi TRS
Gauge/Indicator LEDs
T- Rex sliders
HID retrofit
GSXR rear sets
Zero Gravity screen
Chrome Katana rims
Bandit hugger
Custom paint
Sonic springs

oz353

Thank you all for the quick response and offers!

need to sort a few things out and ill be in touch  :D
'92 GS500E
'89 US factory clip ons
RELOAD fork brace
Bridgestone S20R evo tires 110/70 17 140/70 17
.85 sonic springs & Bel ray fork oil
K&N Lunchbox & rejetted carbs
Vance and Hines full exhaust
Suzuki GSXR600 750 TL 1000 - REAR FOOT PEGS as found on gstwinswiki
R6 rear shock

h2lee

I've got a brand new OEM tach cable for $15 if you still need one.

oz353

Update...
left rear set and foot peg {looking for silver bracket}
replacement clip on bar tubes
kill/start switch assembly including throttle tube<--------------------------------Found
adjuster screw for clutch (on perch)<-----------------------------------------------Found
rear wheel (white)<---------------------------------------------------------------------Found
shift lever<--------------------------------------------------------------------------------Found
tach cable<--------------------------------------------------------------------------------Found
left fork reflector and bracket
guage pod (minus speedo and tach), bracket (silver please), and damper rings <------anyone cheaper than the hundreds they want on ebay
mirrors (bar end mirrors)
side stand and springs<----------------------------------------------------------------Found
rear axle bolt and nut (got ground down badly when po laid down)<--------Found
complete carb rebuild kit
stator cover (and possibly stator)<--------------------------------------------------Found
rear fairings (pref white)
maybe a choke cable
'92 GS500E
'89 US factory clip ons
RELOAD fork brace
Bridgestone S20R evo tires 110/70 17 140/70 17
.85 sonic springs & Bel ray fork oil
K&N Lunchbox & rejetted carbs
Vance and Hines full exhaust
Suzuki GSXR600 750 TL 1000 - REAR FOOT PEGS as found on gstwinswiki
R6 rear shock

weedahoe

2007
K&N Lunchbox
20/62.5/142.5
chromed pegs
R6 shock
89 aluminum knuckle
Lowering links
Bar mirrors w/LEDs
rear LED turns
89 clip ons
Dual Yoshi TRS
Gauge/Indicator LEDs
T- Rex sliders
HID retrofit
GSXR rear sets
Zero Gravity screen
Chrome Katana rims
Bandit hugger
Custom paint
Sonic springs

mlutz9004

I don't know what year you want these parts for...but if you aren't too worried about looks I have a Instrument cluster bracket from an 08. I don't have the rubber gauge damper rings. The bracket is slightly bent and scrapped in the upper LH corner, but is fully functional. It is also unfortunately missing one of the indicator lenses. Let me know if your interested. I'll give it to you pretty much for shipping.




adidasguy

Quote from: mlutz9004 on November 15, 2011, 08:29:32 PM
I don't know what year you want these parts for...but if you aren't too worried about looks I have a Instrument cluster bracket from an 08. I don't have the rubber gauge damper rings. The bracket is slightly bent and scrapped in the upper LH corner, but is fully functional. It is also unfortunately missing one of the indicator lenses. Let me know if your interested. I'll give it to you pretty much for shipping.


??? Photo shows all 4 indicator lenses there. Which is missing?

afterbooster

I would think that could be bent pretty close to straight again no?
89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

mlutz9004

Since I took those pictures I had someone ask me if they could buy one of the green indicator lenses from me, and since I hadn't received any interest in it, I let one of them go. I don't remember where it is the neutral indicator or the turn signal, but it is one of the green ones. I think it could probably be straightened; the main reason I replaced it was b/c it got road rashed and was beginning to get that surface rust.

afterbooster

I have a green/yellow/red caps I could send with your boxOstuff...
89 engine-97 frame, 89 clips, Fenderectomy, Progressive front springs, CF Levers and bar ends,  Nelson-Rigg CL-450, Fieldsheer saddlebags, Led Indicators, Blue LED tach and speed, integrated mirrors, "rear blinker relocation" Corbin seat, Yosh exhaust, DynoJet stage 3

SMF spam blocked by CleanTalk