News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

Another 'Noise' Thread

Started by kg1709, November 14, 2011, 12:09:15 PM

Previous topic - Next topic

kg1709

Hi Guys,

I've noticed the bike getting noisier over the past few weeks, at idle, which goes away when above 2500 RPM. Makes a knocking sound, rhythmically, and sounds a little like a diesel!

Bike has covered 9K miles overall is restricted, and is a 2004. Have been researching the usual suspects, e.g. cam ends (which I'm told are fitted with the shims) and when I got it serviced recently, I asked the mechanic to take a look.

Everything else e.g. valve clearances were OK, so only other possible obvious culprit was the cam chain tensioner, which has been replaced but to no effect. Mechanic wants the bike for some further time to fully inspect the engine, says it sounds like bottom of the engine now!

Obviously this is going to cost, so my question is, should I just live with it assuming that no damage is being done and accept that these bikes with their older technology engines are just prone to rattle a bit?

SMF spam blocked by CleanTalk