'98 Carb Question

[Kijona]

I know I have another thread open about the carbs already, I just need a quick answer on this one.

Is it safe to spray either WD-40 or Gumout carb cleaner spray, down in through every orifice of the carb to make sure I didn't leave any metal shavings in there? I had to take a hacksaw, among other things, to remove one of the float bowl screws. I'd use compressed air but I'm afraid of the pressure damaging the carbs. If I was to use compressed air at say...100PSI...would I be okay if I remove the diaphragms and the floats or are there other sensitive items in there?

[Paulcet]

Will be fine if you remove all rubber parts first.

[The Buddha]

rubber will stand to wd40 and carb cleaner. Its not actually rubber, its really neoprene, it will stand to anyhitng except bleach.
Cool.
Buddha.