Gotta clear out lots of parts Updated May 2

[shonole]

You don't happen to have front/rear rotors and sprockets w/bolts do you? 

I purchased some new wheels and I'm having a hell of a time getting the sprockets and rotors off my old wheels.  I've got them soaking in PB Blaster, but I've got a strong feeling they're not coming off anytime soon..

[adidasguy]

I have a supply of good OEM rotors. I have plenty of rotor bolts, too.

The sprocket is on the cush drive. That just pulls off, move the rubber bumpers to the new wheel and push the cush drive on. So you shouldn't need a sprocket. The cush might be stuck in the rubber bumpers. Grab the sprocket and wiggle until the drive comes off. There is a spacer inside it. Remember to put that in.

[shonole]

I have a supply of good OEM rotors. I have plenty of rotor bolts, too.

The sprocket is on the cush drive. That just pulls off, move the rubber bumpers to the new wheel and push the cush drive on. So you shouldn't need a sprocket. The cush might be stuck in the rubber bumpers. Grab the sprocket and wiggle until the drive comes off. There is a spacer inside it. Remember to put that in.

Ah, sweet.  I'll do some extra pulling then, as the sprocket itself looks to be in good shape.

I'll more than likely be down for a set of rotors though, as it's really hard to get any extra leverage on those allen heads.   

Also, I got the carb boots in today and swapped over, so I'll be shipping them back to you soon.   

[adidasguy]

OK. PM me and we'll work it out for 2 rotors and all bolts.

[average]

Inner right side F fairing shipped to your recurring customer in Garner? 

[canucklehead]

I'm looking for a head for a 96... I think 89-02 will work (maybe other years?)

Griff

[adidasguy]

Inner right side F fairing shipped to your recurring customer in Garner? 

The black inner piece? I'll look for it tonight. Have 2 fairing sets. Want to keep one complete. The other parted out.

[adidasguy]

I'm looking for a head for a 96... I think 89-02 will work (maybe other years?)

Griff

I have a few around. Let me see what's good. Shipping might be an issue as I see you're in Canada.
Tried ebay.ca?

[canucklehead]

I'm looking for a head for a 96... I think 89-02 will work (maybe other years?)

Griff

I have a few around. Let me see what's good. Shipping might be an issue as I see you're in Canada.
Tried ebay.ca?

No heads on ebay... one whole engine, and cyl jugs only.

If shipping to Canuckistan is an issue, I have a mailbox just across the border in Eureka MT. Let me know!

Griff

[adidasguy]

MT would be easier for shipping. But why MT? There are better desolate places to have a post office box 
Isn't that a day's ride to Seattle? Get some monkey butt powder and come pick one up.

I've got a long list of parts to fetch tonight and some cleaning up to do for work on Junior. In the process, I'll look at the heads and take the head off the engine with the bad timing pickup index pin hole. Might as well part that engine since I bet I need tranny parts for Junior.

[adidasguy]

Inner right side F fairing shipped to your recurring customer in Garner? 

The black inner piece? I'll look for it tonight. Have 2 fairing sets. Want to keep one complete. The other parted out.

This show the piece you need?

[oneNonlyTu]

adidasguy, How much, including shipping, for one of those little circle amber reflectors to MD?

[adidasguy]

adidasguy, How much, including shipping, for one of those little circle amber reflectors to MD?

Why not 2 and have a spare? Do you need the spacer for fork mount on newer forks or do you want the metal band that wraps around the fork or just the reflector?
Probably can go in a padded envelope so $5 should cover it.

[average]

Yep

[adidasguy]

Yep

I'll clean it up and see what postage is. Nice to mail my trash to someone! I hate filling up the recycle bin. 

[oneNonlyTu]

adidasguy, How much, including shipping, for one of those little circle amber reflectors to MD?

Why not 2 and have a spare? Do you need the spacer for fork mount on newer forks or do you want the metal band that wraps around the fork or just the reflector?
Probably can go in a padded envelope so $5 should cover it.

Just the reflector itself. Last owner lost it? Now has a piece of yellow reflective tape there, lolz! 

[oneNonlyTu]

Adidasguy, PM sent

[rhebb]

Have any Tach / Speedo gauges with the bracket? Tail light maybe?  Thanks  Rhebb

[adidasguy]

adidasguy, How much, including shipping, for one of those little circle amber reflectors to MD?

Why not 2 and have a spare? Do you need the spacer for fork mount on newer forks or do you want the metal band that wraps around the fork or just the reflector?
Probably can go in a padded envelope so $5 should cover it.

Just the reflector itself. Last owner lost it? Now has a piece of yellow reflective tape there, lolz! 

I see you have a 1991? It uses the rectangle reflectors. 2004+ uses the round ones. How would you mount the round one? Or are yu talking about a different bike?
is the rectangle mounting bracket on thel ower triple there or gone? There is a difference between left and right. The picture you posted shows it has a left reflector so I assume right side rectangle?

[adidasguy]

Have any Tach / Speedo gauges with the bracket? Tail light maybe?  Thanks  Rhebb

What year bike? (specifically mechanical tach or electronic).
What color bracket? Silver or dark metallic?