bout to give up.. carb problems

[Abyss767]

paper, theres a little rust in the tank which get by the filter in the tank and it plugs my carbs up ergo put the paper ones in

[The Buddha]

40 over bore - how much is that in mm ? 1mm ...
Cool.
Buddha.

[Big Rich]

Try either running with no external filters or at least some new ones with the little stones inside. Not paper.

[Abyss767]

.5 to 1 mm

[Flux Maven]

My bike is supposedly bored out. I don't have proof just the previous owners word and I don't know what the over bore is if it indeed is bored out, but when I got it it ran really lean so I re-jetted. 40/150 2 washers 3 turns out. Lunchbox, stock headers, D&D can. It runs a lot better now. So you could try putting washers on your needles and running it with no air box. That would tell you if you aren't getting enough airflow. What do your plugs look like? When my bike was lean I could use however much throttle I wanted except it had a terrible hanging idle. There were times when I thought about giving up too, but now that my bike runs right I don't ever want to get rid of it. Good luck, I hope you can figure it out.

[Abyss767]

i'll give it a shot tomorrow if weather allows. The plugs are white, very lean just doesn't act lean at WOT. so ill give it a shot asap and let u guys know. and i love this bike how it handles and feels its just in tell i can get this right i don't even want to ride it