Stock exhaust midpipe size and jetting

[ATLRIDER]

Hi guys,

Swapping from a 93' stock exhaust to an 06' stock exhaust.  Midpipes are different diameters.

93' = 45mm
06' = 54mm

Matrix states 40/125 with stock filter for 89-2000 model years. Has anyone tried to fit the new, larger diameter pipe and use the above jetting with success?

I'm thinking it may run a tad lean with the bigger midpipe but wanted to chime in before going up in main jet size.

Thanks.

[jestercinti]

Should not make a huge difference between the years, but you bring up a good point.

I'd start with the matrix as a baseline and adjust if necessary.  Whatever you do, let us know the results.  I'm sure someone will have this same problem in the future.

[ATLRIDER]

I'm hoping it doesn't need more than a 125 cause that's the biggest I've got within the range.  Next biggest I've got is 140, 147.5, & 150's