FS: Decals, Jets, Sprocket, Shims, Carb Parts, Short Signals - Pics added

[bombsquad83]

I have a few things that I'd like to sell in case anyone needs them.  Will be updated with pictures later.

Decals - $10 shipped SPF - full set bought from here - http://www.sportbikestickershop.com/Suzuki_c5.htm?page=2
I was originally going with this color, but I think I'm going to change to white to match my wheels.  They are still in the contact paper and have never been taken off of it.
2 SUZUKI Silver Metallic 9" (same size as OEM)
2 GS500E Silver Metallic 9" (same size as OEM)

2 2.65mm valve shims - $10 shipped


2 New 127.5 genuine Mikuni main jets - Still in packet - $5 shipped. going to keep these.  Shipping eats up too much of the cost.  These are cheap to get.

2 Rear Signals - these are plug and play - $10 shipped SOLD

1 15T Used front sprocket.  This is the type without the shoulder.  I replaced it because I replaced my chain, but it has very little wear.  Does have surface rust. - 10$ shipped.


I have 2 sets of carbs that could be used for parts.  I'm thinking about rebuilding one set of these, but some parts can go.  Make me an offer on any part you need.  Some examples of parts that are still good from these, but may need some cleaning:
Needle jets, jet needles, needle spacer, and spring seat.
Diaphragm Covers
Carb Slides and Slide holders


M5x0.8x12mm Stainless Steel Socket Head Cap Screws (for Carbs) $0.50 each shipped.

[bombsquad83]

Prices added.

[Tombstones81]

I can have the $$ for the rear blinkers next Friday (the 20th)

if you feel like waiting a week.

been meaning to replace mine with nicer and shorter.

(went crazy with my last pay, clothes and bike parts ate my $$!) haha

[bombsquad83]

I can wait until then, no problem.  Just let me know if anything changes.

[ninjeff]

OHOHOH! Can i get the GS500 stickers there? That'll be PERFECT when i get around to paint.

[bombsquad83]

They are yours!

[ke7syv]

Just wanted to start a line for the blinkers. If anything changes with tombstone, hit me up. 

[Tronspeed3]

How much for the Diaphragm cap from the left carb?

[bombsquad83]

$10 shipped sound ok?   I think those are interchangeable too.  Not left right.

[Tombstones81]

Just wanted to start a line for the blinkers. If anything changes with tombstone, hit me up. 

heehee sorry man.
for $10, new and shorter then stock but still big enough to be good rear blinkers.. no way I wont get em.

even if I am shelling out $400 as well this pay for another but this time 100% running engine

[Tronspeed3]

$10 shipped sound ok?   I think those are interchangeable too.  Not left right.

How about $8 and pm me your PayPal and I'll get the money sent ASAP

[bombsquad83]

Decals reserved for ninjeff.
Signals are gone along with my M7x1mm Helicoil kit. 
1 diaphragm cover gone.  I think I'm going to hold on to the rest of these to rebuild one set and replace an epoxied one on my bike.
1 Needle jet and needle reserved for FViller.

Still available:
Other random carb parts, just ask
15T Sprocket
2 2.65 mm valve shims

[bombsquad83]

Just ordered 50 M5x12mm stainless steel socket head cap screws.  These are the ones that replace those horrible JIS screws our carbs.  12 of these on '89-'00 bikes, and some on the newer carbs as well.  I'm only going to need 12 of these for myself.  This leaves 38 to sell to GStwin members.  50 cents per screw shipped gets you as many as you want.  These are like $1 a piece at the hardware store, and cost ~$10 to ship from fastenal or bolt depot, so this should get them to you a bit cheaper for a few.  Just let me know how many you need.

[ninjeff]

I'll take 12. I'll snag em when i grab those decals.

[bombsquad83]

Sounds good.  I'll add those in for free since I don't have to ship either of them.

[bombsquad83]

Stainless carb bolts got here last night.  Came in one bag of 49 and another bag of 1...

[steezin_and_wheezin]

haha someone's messing with yer head!!

i might be interested in a set of those bolts when we pull my friends carbs apart, i'll let ya know