News:

Need a manual?  Buy a Haynes manual Here

Main Menu

WTB: misc parts

Started by Big Rich, August 18, 2012, 11:16:27 PM

Previous topic - Next topic

Big Rich

Ok folks, as some of you may have seen I just purchased a GS450 recently, and it needs a little TLC. Some parts from the GS500 will bolt right on, and I'd like to spend my cash here before I head to ebay. It doesn't really matter if they are used/dirty/whatever, so long as it's still functional. Here's what I'm looking for:

Stator (no cracked or missing magnets would be great)
regulator/rectifier
airbox (with or without filter, doesn't matter)
1st generation carbs if you have them (would like it if they were complete with no broken bits)
intake boots for said carbs

I'm a little low on funds at the moment, but will be buying this stuff (and probably more) eventually.

Thanks!
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

weedahoe

I've got a stator with excellent magnets, a regulator and an air box.

No carbs or boots though.
2007
K&N Lunchbox
20/62.5/142.5
chromed pegs
R6 shock
89 aluminum knuckle
Lowering links
Bar mirrors w/LEDs
rear LED turns
89 clip ons
Dual Yoshi TRS
Gauge/Indicator LEDs
T- Rex sliders
HID retrofit
GSXR rear sets
Zero Gravity screen
Chrome Katana rims
Bandit hugger
Custom paint
Sonic springs

Big Rich

Pm me with a price Weedahoe. Thanks!
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

adidasguy

I may have some things. Where are you located?

Have a set of carbs. One cap was cracked but repaired with JBweld. Might have another cap in the box-o-carb-parts.
Can check for boots, Should have air boxes.

Big Rich

Near Pittsburgh - 16117 .
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

Big Rich

The thing I need first for mock up is an air box - anybody able to get one sent out soon?

And as far as the carbs go, the important dimension I need is the intake port opening on the head / mounting boot.

I appreciate any help I can get here.
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

weedahoe

Quote from: weedahoe on August 18, 2012, 11:18:44 PM
I've got a stator with excellent magnets, a regulator and an air box.

No carbs or boots though.

^^^

see post

Its got a good filter in it too
2007
K&N Lunchbox
20/62.5/142.5
chromed pegs
R6 shock
89 aluminum knuckle
Lowering links
Bar mirrors w/LEDs
rear LED turns
89 clip ons
Dual Yoshi TRS
Gauge/Indicator LEDs
T- Rex sliders
HID retrofit
GSXR rear sets
Zero Gravity screen
Chrome Katana rims
Bandit hugger
Custom paint
Sonic springs

Big Rich

How much for just the airbox for right now? The stator and R/R can wait til next payday........
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

weedahoe

How about a McDonalds lunch and shipping for a total of $20
2007
K&N Lunchbox
20/62.5/142.5
chromed pegs
R6 shock
89 aluminum knuckle
Lowering links
Bar mirrors w/LEDs
rear LED turns
89 clip ons
Dual Yoshi TRS
Gauge/Indicator LEDs
T- Rex sliders
HID retrofit
GSXR rear sets
Zero Gravity screen
Chrome Katana rims
Bandit hugger
Custom paint
Sonic springs

Big Rich

83 GR650 (riding / rolling project)

It's opener there in the wide open air...

SMF spam blocked by CleanTalk