FS: Carb parts 89-00

[bombsquad83]

CLICK TO ENLARGE


All stock carb parts from 89-00 carbs.

Parts remaining:
1 Right Carb float bowl (needs new drain plug) - $10
1 White slide holder (bottom o-ring could be used, but might want to replace) - $10
1 Float (needs o-ring) - $5
1 choke bracket with clips- $4
4 Stock jet needles with minor wear (2 have e-clips) - $3 each
2 Choke plungers with springs - $3 each
1 bottom carb bracket - $2
1 top carb bracket - $2
4 Used but cleaned 122.5 main jets - $1 each
2 Used but cleaned 37.5 pilots - $1 each
2 Plastic choke retaining clips (need rubber gaskets) - Cost of shipping
4 needle valve sets (I'm not sure if these will still work.  They need o-rings) - Cost of shipping
2 o-rings for mixture screws (a little old, but might still work) - Free
2 spring seats - Free
1 needle spacer - Free

[bombsquad83]

Prices have been added and all prices include shipping.

All parts without a price will be sold at $1 or the cost of shipping, whichever is higher.

14 stainless steel socket head cap screws are left to sell.

[Tombstones81]

Need the $3 part on the bottom between the carbs.
the part where the fuel line from the petcock goes.

Need it ASAPPPPPPPPP! my man!

Just put my 150 main jets in and friggin broke mine taking the fuel line off ><

(edit)
NOT the top overfill one.

The bottom one the fuel line attaches to.

Just saying that to be 100% accurate as I am in DIREEEE need of one ASAP!

so the Quickest you can get it out man, would GREATLYYYYY appreciate it!

checkin my PMs for ur PP addy, will toss a fin ($5) ur way, even tho u stated prices include shipping and have it at $3

(edit again)
Just to be 100% certain, copied the pic and circled the part I need in Red.
Yes I need it that badly so I am being that thorough. hahahahaa

[bombsquad83]

Unfortunately with the holiday it will be Tuesday before I can send it out, but I will make sure to mail it tuesday morning and it should get there by Thursday or Friday.  If that is not quick enough then let me know and we can work something out.

[Tombstones81]

Nah that is perfectly fine.

Its been a BAD day and I didnt realize its Sunday and tomorrow is a Holiday.

First thing Tuesday being mailed out is perfectly fine.
even if I cant ride all week (still have to go out and see if how I glued it on the outside is holding up)

Gotta say, friggin Life saver man!
Sat down and instantly remembered seeing this thread and jumped Right on it!

Greatly appreciate it!
Karma inc!

[bombsquad83]

Right side carb body and gas inlet T are sold and shipping on Tuesday.

[bombsquad83]

Packages mailed this morning.  Let me know when they arrive and if you have any problems.

[bombsquad83]

Left carb body and float bowl, 12 of 14 remaining socket head cap screws, and rubber air outlet T sold pending funds.

[bombsquad83]

Left carb body is still available.  I also still have one more set of 12 stainless steel socket head cap screws.

Rubber T, and left carb float bowl are sold.

[sahaider]

You wouldn't happen to have the diaphragm cover for the left carb would you?

[Tombstones81]

Left carb body is still available.  I also still have one more set of 12 stainless steel socket head cap screws.

Rubber T, and left carb float bowl are sold.

"Might" need the carb body and possibly the bowl.

Will check first thing tomorrow and get back to ya.

[bombsquad83]

10-4, let me know.  It's the left carb body and the right bowl that I have left.

[Tombstones81]

yep its the left carb body that I need.
and my bowl is good as well, so I dont need a left one tho the one u got left is the right one.

So just the carb body.

I GOTTA get myself some small allen wrenches already!

Only ones I have are for my socket wrench and until recently, I've overtorqued a few things.

like the one socket on the bottom of the left carb, its nicely cracked but still useable "for now"
which is why im replacing it.

[bombsquad83]

PM replied to.

[bombsquad83]

Left carb body is on its way to Tombstones81.

[red rider]

Do u still have the float needle and float seats with 0-rings?

[bombsquad83]

If you are willing to wait a while an take a risk on old used parts and/or a K&L set that I didn't have good luck with.  I can send you the K&L set and a used OEM set for $5 shipped.  Basically I just couldn't get them to work so you can have them for almost the price of shipping.  My wife is being induced with our first child tomorrow morning, so I'm not sure when I can send them out if you are interested.

[bombsquad83]

Springs, 2 JIS bolts, and last set of stainless bolts sold.

[bombsquad83]

First post updated.