After market bar end weights (blue and carbon fiber)

[weedahoe]

Nothing wrong with these other than the scratches on the one. But I took these off and put a set of OEMs on after I powder coated them gloss black. These have the bolts but need replacement rubber bushings.

$15 shipped

Here is a set on eBay
http://www.ebay.com/itm/CARBON-FIBRE-INSET-BAR-END-ENDS-WEIGHTS-BLUE-22mm-7-8-/320507157367?pt=UK_Motorcycle_Parts&hash=item4a9fb71b77

[weedahoe]

~~SOLD~~

[bombsquad83]

Where do you get replacement rubber bushings for these?

[adidasguy]

If you need rubber bushings,

1. use the ones from your existing bars
2. Order them - it is a current Suzuki part.
3. Make rubber bushings from a stack of faucet rubber washers.

You'll need longer bolt. Right end nut actually works and has a knurled face. The left (inner) nut is large and acts just as a spacer - it doesn't thread on.
For reference:

[weedahoe]

Good pic.

If it were me, I would just order new and non abused ones. Not like they cost much.

[Higgins13]

If these were not scratched I would be all over them.

[weedahoe]

Yeah but you would be really late. These sold long ago