Bogging at high speed/rpms

[salamander]

Also, that black cylinder is your ignition coil I think (Don't flame me if I'm wrong, I said I think lol... but looks like the plug wire comes out of that and that would by default come from the coil)

BBoy, fyi (no flame intended) the coils are just visible in the first pic at the top, one on the left and one on the right, just under the frame.  The wires you saw are actually going under the filter element to the right coil -- you just lose track of them in the picture since they're hidden.

[Funderb]

maniaka-  a vacuum line should go to that black cylinder you refer to in your picture, you may have a vac line disconnected and sucking free air if you haven't plugged it up. Check carefully all of your small rubber vac lines and where they lead.

in this pic:


where those three hoses come to a tee on the right hand side, i believe that one should be hooked up to that canister. Where does it actually go? it disappears under the cross tube?

[BockinBboy]

BBoy, fyi (no flame intended) the coils are just visible in the first pic at the top, one on the left and one on the right, just under the frame.  The wires you saw are actually going under the filter element to the right coil -- you just lose track of them in the picture since they're hidden.

Gotcha! Thanks. 

- Bboy