News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Top end engine chirp? Video included.

Started by N618ft, February 10, 2013, 11:22:48 AM

Previous topic - Next topic

N618ft

Just slapped a 5000 mile motor in my GS500F.   It runs fine, ran it 2-3 miles last night.  However, I started it up this morning, let it warm up, and it started making this chirp:

http://youtu.be/gTN_o7Z13Bc


It seems to be coming more from the right side but I can't really tell.  It goes up with RPMs (although it's hard to hear it over the RPMs so I may be mistaking). 

xunedeinx

Sort of sounds like a loose screw rattling against something.


N618ft

It does, but I've read people saying their cams were chirping similarly?  I'd say it was the PAIR system/valves but it's louder on the right side...

Zethioth

2005 GS500F
Thread located Here.

N618ft

Ill check the valve clearance but I need a new valve cover gasket in that case.

adidasguy

Valve cover gasket does not always need replacing.

N618ft

Put in new plugs, some Lucas injector cleaner (felt like some of the jets were less than clean), lubed up all of the mounts, and ran it down the block a few times.  Noise is gone for now.  It could have just been an awkward harmonic being created by it running a hair rough.  Either way, here's how it sounds now - still a couple rattles from elsewhere on the bike - sound normal to you guys?

http://youtu.be/Qhm1HNCKyQA

Twisted


SMF spam blocked by CleanTalk