Where do you buy your jets?

[Zethioth]

Why do you guys buy your jets from? You have to buy them in packages (multiples of the same ones)?

I have never worked on carburetors before, or much of anything. I'm up for the challenge. Plus my bike would REALLY appreciate it.

The only modification I have is a K&N Drop-In w/ restrictor on at the moment. I'm not going to do an exhaust for a while, until I have the funds.

[Twisted]

Make it easier on yourself. Wait till you have the funds to do your exhaust then do your jets. You will only be doing it once then. You will need different jets once you put your exhaust on. Is the bike running incredibly lean at the moment with the K&N filter?

Buddha is the go to guy on this forum for jets. PM him for what you need, when you need it.

[mitch79]

eBay from Niche Cycle Supply http://stores.ebay.com/nichecyclesupply
They sell genuine Mikuni jets. Search for the part number and size that you want.
Pilots = N224.103
Mid Main & Main = N102.221

[weedahoe]

eBay from Niche Cycle Supply http://stores.ebay.com/nichecyclesupply
They sell genuine Mikuni jets. Search for the part number and size that you want.
Pilots = N224.103
Mid Main & Main = N102.221

^^^ Thats where I bought mine from

[jestercinti]

eBay from Niche Cycle Supply http://stores.ebay.com/nichecyclesupply
They sell genuine Mikuni jets. Search for the part number and size that you want.
Pilots = N224.103
Mid Main & Main = N102.221

^^^ Thats where I bought mine from

That makes two of us.

[Janx101]

http://www.gulfstream.com/products/g650/

... Oops .. Only read the title... Then had a daydream moment 'jack black style' ... And came up with the above 

[jjcardozo86]

  cool jet

[gsatterw]

+1 on niche cycle supply

great price.

[Zethioth]

Website saved. Thanks guys. This should be put on the website somewhere. Seeing as a lot of you guys get them there and it is hard to find.
Eh John?

[Tombstones81]

and another one.

http://www.jetsrus.com/
who I deal with.

never a single problem  & even had the float bowl gaskets for my super magna 

[peteGS]

Dealing with places like Jets R Us is difficult here in Aus because they don't do Paypal etc.

I've found them cheap enough locally anyway at www.mikunioz.com.

There's another one www.iwt.com.au who's good as well but slightly dearer.

Both places will express post.

For the GS450, the same main jet applies N102.221 Small Round, but for the pilot you need to use the VM22/210 but there is a catch with this. The genuine Mikuni has bleed holes down the side whereas the stock 17.5 does not. I have not been able to determine at this point if a stock 17.5 flows any less fuel than a genuine Mikuni VM22/210 17.5.

Oh, and neither place stocks Mikuni needle shims, but I have discovered eBay seller "Exhaust Gas Technologies" that sell a shim kit which is excellent as it actually has three different size shims in there, whereas the Mikuni shims are all the same thickness.

http://www.ebay.com.au/itm/TWIN-Carb-Needle-Shim-Kit-Mikuni-Carburetors-/110604954045?pt=Snowmobile_Parts_Accessories&hash=item19c091a9bd#ht_776wt_1099

[crzydood17]

Buy them from Buddha!