1992 gs500e starter removal?

[aaronmact]

Hey guys its me again. I managed to figure out the engine wasn't seized with you alls help. but now I'm onto another problem. I recently ordered a kickstand relay, turn signal regulator, and right handle bar controls. And from it all I now have tach lights and blinkers and all that fun stuff.  But only one headlight option( another question for another day) but I go to start the bike. Kick stands up. Its in neutral. I pull the clutch back flick it to on and hit the start button and I get nothing. Unfortunately I don't have a volt ohm meter to track down the other things further. But from what I can derive the kickstand switch and the clutch switch are good. Now I tried by passing the starter relay by jumping the two terminals and got nothing but some lovely sparks. Not even a murmur from the starter. So I went down and unbolted the cover,  and the thing looks like its covered in acid. So I undid the two bolts on the end and tried to pull it out but bit feels like there's more holding it in. In my curiosity I pulled off the black cover on the connection and all I got was water pouring out. So as of now my question is how to I remove the starter motor? I have the two bolts on the end out what else do I have to do? :/

[aaronmact]

Never mind, it was just that rusted in place. -.-