News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Having problems with new relay and led signals

Started by cyamaura, February 28, 2014, 09:09:44 PM

Previous topic - Next topic

smittybuilt92


adidasguy

Quote from: smittybuilt92 on April 21, 2014, 10:37:47 AM
Where the relay located
I am quite amazed that people work on their bikes and have no manual at all.
Everyone must have a manual to maintain and work on your bike.
The manuals show where all the parts are in addition to regular maintenance, specs and trouble shooting.

Flasher relay on right side next to the voltage regulator and side stand relay on the metal bracket.

smittybuilt92

Hey now. I was given the bike and didn't receive one. I've gotten by just fine with out the thing.  But back to the question all the other posts on this topic everyone says 2 pin relay. That relay on the bike is a 4  pin. So riddle me that one cuz I'm sure the manual wont tell me that.

adidasguy

Excuse the crankiness. It is Monday morning.
Do get a manual.

The flasher relay is 2 pins. The 4 pin would be the side stand relay. Flasher relay should be next to it. It may be a square black think or a round metal can.

On that metal bracket will be the regulator on the left (big thing with metal find). To the right will be the side stand and flasher relays. Further to the right would be the starter relay (has the fuse hidden in it and a big red wire going to the battery).

If you provide a picture of what you see we can point out the flasher relay (unless the PO moved it somewhere else).

smittybuilt92


SMF spam blocked by CleanTalk