Clip on handlebars

[pomme123]

So I got them mounted. FINALLY. My god they feel so nice. But I have a problem. The brake line is rubbing on the speedo and I don't know how to remedy this. Can anybody help. Pics are as follow


Sent from my iPhone using Tapatalk

[dinkydonuts]

Move the entire master cylinder a few mm to the right on the handle bar. The picture shows that you have some room.

[adidasguy]

1. Loosen the banjo and swing the brake line forward or back a little to fit better

2. Change the brake line to one where the banjo angles the other way or comes off straight, rather than angled towards the gauges.

[pomme123]

No room. The pictures a little misleading. The master cylinder is making contact with the throttle housing and that's already right at the end. When I twist the brake line will I need to rebleed it if it leaks or should I be ok?


Sent from my iPhone using Tapatalk

[pomme123]

Don't worry. Loosened it slightly. Moved it over. Now it's beautiful. Thanks for your help. Would a master cylinder from a 1990 model gs fit on a 09.


Sent from my iPhone using Tapatalk

[adidasguy]

Yes,it would fit.
One that old might need a rebuild, but will fit a little better.
If things OK now, I'd stay with what you have.
Looks good!