News:

Need a manual?  Buy a Haynes manual Here

Main Menu

Front Brake Reservoir

Started by Jimbob, April 25, 2014, 06:48:00 PM

Previous topic - Next topic

Jimbob

Hey guys just wondering if you think this needs to be replaced as im concerned about the clear plastic wear cheers

[attachment deleted by admin]

jsyzdek

how 'funny'!

I was working on my bike today and noticed that the little plastic window doesn't look that great. I started poking around with a screwdriver until I realized that the window is actually falling apart. Before it started leaking I covered it with silicone sealant. I was about to ask around what to do with it. It can probably be replaced easily, but I'm not sure....
GS500F (2006)
LED indicator lights/clock backlights, LED headlight/parking light/rear blinkers, Sonic Springs, 16 cell Li battery (10Ah, 1100A CCC), 12V socket, 3-piece luggage set, front and rear-view camera

pomme123

Mines doing the same. Interested in this.


Sent from my iPhone using Tapatalk


Jimbob

Have you done that to your bike?

adidasguy

Just ordered them because we have a pile of good reservoirs with bad windows in our parts stash.

Jimbob

Do you know how much a new master break cyclinder would be?

Jimbob

The reason I ask is it sounds like it's hard to replace. Also how hard is it to remove the master cylinder?

robfriedenberger

I have not performed the job of replaceing the sight glass, but I would Imagen on a cold or rainy night any one can do with with in an hour with a beer or two.

Should only take a few moments to remove the mast cylinder, 2 screws on top remove the fluid, remove the banjo bolt connecting it to the hose, and 2 x6 or 8MM bolts to hold it on the bars.

Install is just the opposite, except you will need to bleed the master before you connect the hose.

Jimbob

Cheers. I just need to decide which way to go. I guess if it's replaced with glass that is not made for it then there is a chance it could leak

robfriedenberger

The sight glass is under very little pressure, if replaced correctly it won't leak! All the pressure is pushed down the hose if any thing there is a slight vacuum


Sent from my iPhone using Tapatalk

pomme123

I've ordered one. It's only $17 so it's worth a go. I'll tell you how i go and post photos or a walk through or something


Sent from my iPhone using Tapatalk

Jimbob

A video walk through would be great and should be put in the video section as it sounds like a few people will need to do this.

Thanks :)

pomme123

Ok I will try for the video. Just a heads up. I'm no good at it. Haha.


Sent from my iPhone using Tapatalk

Jimbob

Maybe get a camera assistant ;)

pomme123

Haha. Yeah might have to give my sister $5 to follow me with a camera. I won't get her to do make up though.


Sent from my iPhone using Tapatalk

Jimbob

Not going to go all out ay. You could make the video in a suit

pomme123

Even better. A suit t-shirt. Haha


Sent from my iPhone using Tapatalk

SMF spam blocked by CleanTalk