'99 Part Out

amkluttz · February 24, 2015, 06:19:18 AM

Quote from: Hoopes91 on February 23, 2015, 07:42:52 PM
do you still have the front fender?

Front fender has been sold.

Reeko236 · March 01, 2015, 12:40:43 PM

Got the crankshaft?

amkluttz · March 01, 2015, 01:50:18 PM

Quote from: Reeko236 on March 01, 2015, 12:40:43 PM
Got the crankshaft?

I'm sure I do but I have no idea what condition it is in. Do I have to separate the cases to get to it?

-Andy

Reeko236 · March 01, 2015, 01:57:50 PM

Yes

was your engine running well? If so I may pick up the whole case.. Lmk!

amkluttz · March 01, 2015, 03:44:47 PM

Quote from: Reeko236 on March 01, 2015, 01:57:50 PM
Yes was your engine running well? If so I may pick up the whole case.. Lmk!

The engine had some issues but I have no idea what they were. Someone told me that it may be the rings and seals but that was a guess from the person that bought my top end. I would imagine the crank is in good condition but I can't know until I tear it apart. With a newborn in the house I'm not entirely sure when that may be. If it's something you're interested in we could probably work out a deal. Where are you located?

-Andy

Reeko236 · March 01, 2015, 03:59:11 PM

In I'm Texas, zip code 78666. Thanks!

Reeko236 · March 01, 2015, 10:13:32 PM

Andy- I PM'd ya. Thanks!

inkfiend138 · March 06, 2015, 10:24:09 PM

Are those the bike master drag bars?? Jw because I'm thinking of ordering them from jcwhitney. I think there like $25?

rainbballer17 · March 10, 2015, 07:58:49 PM

how much for the katana wheel?

amkluttz · March 10, 2015, 08:36:30 PM

Quote from: inkfiend138 on March 06, 2015, 10:24:09 PM
Are those the bike master drag bars?? Jw because I'm thinking of ordering them from jcwhitney. I think there like $25?

They are bikemaster drag bars and yes they are fairly cheap brand new. They have been good bars.

amkluttz · March 11, 2015, 06:13:44 AM

Quote from: rainbballer17 on March 10, 2015, 07:58:49 PM
how much for the katana wheel?

It depends on what exactly you want.

$125 + Shipping for the wheel and tire
$75 + Shipping for just the wheel

That may seem expensive for just the wheel but that includes the cost of having to get the tire removed. I would prefer to sell the wheel/tire combo as the tire is not usable for me. If I have the tire removed I can not guarantee that the paint won't be scratched/removed by the machine since they are painted. I will, however, use the same shop that put it on without scratching it.

The wheel does have a rotor but does not have a sprocket. Those prices are without the cush drive but the GS cush drive works on these wheels. The tire has 3500+ miles on it but it doesn't appear to have much wear. I bought a dual compound sport touring tire because I wanted longevity. I've read reviews of this tire going 8000+ miles. There should be pictures in the first post.

-Andy

rainbballer17 · March 11, 2015, 06:33:58 AM

What would I all need to put it on the bike?? Like any new parts?

amkluttz · March 11, 2015, 06:53:40 AM

It uses the stock GS rear axle. Some people messed around with the rear caliper but all I did was mount the wheel and use the stock caliper and I never had a problem. The rear pads wear a little unevenly. I did have to clearance the chain guard a little for the rear tire so that it wouldn't hit. I also had to heat and bend the brake arm to clearance the other side of the tire. I've read that you can just buy a brake arm from a Bandit (I think) and you don't have to mess with bending your stock one. It's a fairly easy swap to do; the hardest part for me was getting the wheel/tire in the swing arm and around the brake caliper without scratching the wheel. You will need your cush drive and a rear sprocket but if your current one isn't in need of replacement you can just use that one.

There is an entire thread on here, and I believe on the GS Wiki, about doing this swap. I think it was from member Turd Ferguson. That's where I got all of my info.

-Andy

skreemer · April 06, 2015, 09:15:53 AM

A couple asked about them but I have not seen where they are sold... Do you still have the carbs?

amkluttz · April 06, 2015, 09:29:13 AM

Quote from: skreemer on April 06, 2015, 09:15:53 AM
A couple asked about them but I have not seen where they are sold... Do you still have the carbs?

The carbs have been sold. I'm sorry, I forgot to add that to the list of things sold along with the chain and sprockets.

-Andy

TXTrey · May 07, 2015, 08:09:04 AM

Is the exhaust still available? If so, how much with shipping to 77084? Thanks!

amkluttz · May 07, 2015, 09:03:07 AM

Quote from: TXTrey on May 07, 2015, 08:09:04 AM
Is the exhaust still available? If so, how much with shipping to 77084? Thanks!

I do still have the exhaust. Give me several days because I will have to take the whole thing to UPS to get a shipping quote from them. As soon as I do I will get you a total price including shipping.

Thanks,
-Andy

Matty206 · June 20, 2015, 11:05:34 PM

Will you sell the ignition along with the key?

amkluttz · June 22, 2015, 04:15:26 AM

Quote from: Matty206 on June 20, 2015, 11:05:34 PM
Will you sell the ignition along with the key?

I will. I sent you a PM.

-Andy

amkluttz · September 21, 2015, 05:44:27 AM

Bump!

I still have a frame with a clear title that I am tired of looking at. I would rather not send it to the scrap pile but I'm not going to hang on to it forever. Also still have the lower half of a motor and some other parts hanging around.

Make an offer.

Thanks,
-Andy

News:

'99 Part Out