News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Idle sticking at 4k

Started by SkyBob, January 22, 2015, 02:44:50 PM

Previous topic - Next topic

SkyBob

Hello! Thanks for attempting to help me, anyways I own a 93 with 10k miles on it, ran okay but I just cleaned and rejetted the carbs for the Vance&hines full exhuast and lunchbox airbox.I didn't mess with the float since I'm not quite sure on them. Runs so much better, real snappy and quick...but.....a warm idle sits at 4k and I've checked all the vaccumm lines, throttle cable, choke cable and still idling high. Any idea? :( also the carbs are set to the stock pilot, 150 main, 1 washer and 3 turns out. Buddhas recommendation. Thanks
93' Gs500e
In Process of Swapping Head
Vance&Hines Full Exhaust
lunchbox airbox
40/150/1Wash(3-turns)
Repainted metallic Blurple
End Mirror
LCD Speedometer
636 Led integrated tail light
HID 5000k
Cut Frame
Aftermarket pegs
Relocated wires&plate
110/140 tires

And my Stunt Fz-09

Elmojo

Have you adjusted the idle screw? It's the big one with the knob on it that hangs down between the carbs.
It's what's supposed to set the idle rpms, assuming all other parts of the system are functioning correctly.

SMF spam blocked by CleanTalk