Can a Gs500 engine from year 2000 fit on a frame from 1993??

[roedvigmads]

Hey everybody

Can a gs500e engine from year 2000 fit on a gs500e frame from 1993??

I look forward to hear from you guys

Greatings from Denmark

[GS500Schultz]

i don't see why it wouldnt.

the frame didn't change much

[Soloratov]

The engine from any year GS, should fit fine in an year frame. It's the carbs and a few other electrical items that changed.

[Janx101]

..  and the oil cooler/mounts?

[gsJack]

No oil cooler on either 2000 or 1993 GS500E models for US market.  Both have mechanical tach, both have dual coil ignition pickups, neither have 3 circuit carbs so this should be an easy one. 

[Janx101]

Oops... didn't notice the E designation. .. pardon my red face!  Lol

[syntax_error]

You need the full 2000 harness, an electronic tach, the duel throttle cables, the 2000 carbs and intake boots, the 200p throttle hand control, and the 2000 petcock do it painlessly in one go.

[syntax_error]

You can make block off plates for the PARE system and cap off the vac lines on the carb or leave it in place. I put an K&N oil breather filter on mine and left the system in tact as their us no gain in removing it.

[gsJack]

No oil cooler on either 2000 or 1993 GS500E models for US market.  Both have mechanical tach, both have dual coil ignition pickups, neither have 3 circuit carbs so this should be an easy one.

[syntax_error]

Hahaha I should have read the post more thoroughly.