News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

Shift lever getting stuck between first and 2nd

Started by riderphyziks, September 12, 2016, 01:53:03 PM

Previous topic - Next topic

riderphyziks

Sometimes when I am shifting from first to second the gear will jam, and rev the engine up way too high for my liking. What could be causing the jam? Would it be a bad idea to replace the front/rear sprockets? If so, what sprockets would you guys reccomend for aftermarket?
1989 GS500

Big Rich

I'm thinking there's a couple problems here.....

1) The gear jamming is most likely caused by your clutch cable needing adjusted. There are 3 points that need adjusted - check the service manual.

2) The engine revving is kinda all on you - the throttle isn't connected to the clutch..... but it happens.

3) Are your sprockets / chain worn out? If not, there's no need to replace them.
83 GR650 (riding / rolling project)

It's opener there in the wide open air...

Atesz792

First things first... oil change!
When was it last done?
'04 GS500F with 50k miles updated July 2022.
Ride it like a 2 stroke:
1: Rev high
2: Add oil
3: Repeat

kapiteinkoek

#3
Check for free play on the gear lever. If there is too much play it becomes really easy to 'miss' a gear when trying to shift.

If there is play try to solve it to see if it feels better. Leaving play on the lever also eats away the lever axle faster. I fix it by replacing the lever then filling the gaps (due to a worn axle) with needles before tightening the bolt.



Recently received another GS500 and I kept messing up changing gears because of play on the lever.

SMF spam blocked by CleanTalk