What option should i take? ebay product any good?

[emanuel_v19]

Hello all,

So i want to raise my handlebars up about an 1" and get them a bit closer to me(more pull back). I recently ordered some Bike master GP Touring handlebars and waiting to install them to see how they will fit.

I have a few options and was wondering what you guys think is best:

1 -  Buy some stock clamps, about $25ish or so on ebay, and that will raise it up a bit and see how they will fit with the GP bars.

2 -  Buy these which have a pull back too
http://www.ebay.com/itm/BP-1-Up-1-25-Back-Silver-Handlebar-Riser-Kit-Suzuki-GS-Series-/321931603866?fits=Model%3AGS500&hash=item4af49e6f9a:g:lvoAAOSwjXRXYoH9&vxp=mtr

3 - or these with pull back
http://www.ebay.com/itm/1-1-25-Handlebar-Risers-GS500-GS1100-LS650-GS-500-B-/181743823634?hash=item2a50c6ab12:g:B~YAAOSwcdBWRdLZ&vxp=mtr

4 - or these with pull back too
http://www.ebay.com/itm/291122917919?ul_noapp=true

Now, these GP bars are supposed to have more pull back than stock so i will try them on first and see how that goes. My main question here i guess is if the ebay risers are worth the money. I know there are other options but they are like $100 and i don't really have the money to spend at the moment. As far as the stock ones, they are cheaper but they only raise the bars. I am in a little pickle :/

What do you guys think of these ebay risers?

[Endopotential]

Not certain about those parts in particular, but I've had fine luck getting bike parts off of EBay.  Heck, half my current bike is made from parts I found there.  So far, so good.

Those risers are not a particularly high stress, high load bearing part. As long as you put a bit of threadlocker on all the bolts, I think you'll be fine.

More expensive stuff is just as likely to be made in a similar factory from China, but with fancier marketing and packaging.

[the_63]

I thought I'd like the contrast between the silver and the black risers, but it turns out I'd have to go with number 2.

[user11235813]

I almost went with those myself but in the end I did not like the ugly hole they leave at the bottom. I ended up going with the motech risers, they are nicely made and well finished and also come in black.

http://www.ebay.com/itm/SW-MOTECH-Barback-Handlebar-Motorcycle-Risers-Up-31mm-Back-22mm-For-Various-OEMs-/122254090635?hash=item1c76e9618b:g:he8AAOSwA3dYQ1uT&vxp=mtr

[emanuel_v19]

Thank you! Ive noticed they are in mm sizing. Which size is for our handlebar???

[mr72]

7/8" =~ 22mm.

[emanuel_v19]

what about these?

http://www.ebay.com/itm/Genmar-X-102-Pullback-Risers-For-7-8-Handlebars-/401235259312?hash=item5d6b7c2fb0:g:WxkAAOSwA3dYPwZA&vxp=mtr

[emanuel_v19]

Nvmd. Just bought some. Thank you all for the help