News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Hollow vibration noise

Started by Nelsonsh, May 29, 2018, 06:38:44 PM

Previous topic - Next topic

Nelsonsh

Hi all, I just purchased a Suzuki GS500 as my first bike. I'm not sure if this is an issue or not but when my bike revs high on a low gear I hear a hollow vibrating noise coming from the front part of the engine or fork area. Any ideas what this noise could be or if I should be concerned?

J_Walker

is the gas tank half empty? normally mine vibrates the gas tank.
-Walker

Nelsonsh

No. I thought that too, but same noise occurs whether tank is full or empty

ShowBizWolf

Hi Nelsonsh, welcome to the forum!

Are the bolts that hold the front fender on tight? That's my first thought.
Superbike bars, '04 GSXR headlight & cowl, DRZ signals, 1/2" fork brace, 'Busa fender, stainless exhaust & brake lines, belly pan, LED dash & brake bulbs, 140/80 rear hoop, F tail lens, SV650 shock, Bandit400 hugger, aluminum heel guards & pegs, fork preload adjusters, .75 SonicSprings, heated grips

Kok

Sounds like it could be the same issue i had with mine.

- Look at this: http://gstwins.com/gsboard/index.php?topic=72281

Forbsey

Quote from: Kok on May 29, 2018, 09:44:42 PM
Sounds like it could be the same issue i had with mine.

- Look at this: http://gstwins.com/gsboard/index.php?topic=72281
I think this may be my issue as well, can you post a pic of where you were talking about on the bike. I couldn't make sense of the picture you posted, since I'm away from my bike atm

Sent from my SM-G955W using Tapatalk


ajensen

Is the front gas tank rubber in place?

Kok

It was on the underside of the plastic fairing situated just in front of / below the speedo/tachometer assembly. You'll have to remove it to have a look.
As I described in my original post i linked to: The plastic was simply rubbing or well rather vibrating against the metal tube "framework" below it., creating the noise.

SMF spam blocked by CleanTalk