News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

GS500e won't Idle without Choke

Started by Jelziie, February 19, 2019, 06:35:52 PM

Previous topic - Next topic

Jelziie

I've recently have installed new clutch plates and springs and started using iridium spark plugs.
Now whenever I start the bike it has trouble idling without the choke.
After not hearing it run for a while I can't tell if there is noise coming from different parts of the engine or not. But it appears to be as if it's only using one cylinder.
So I switched the spark plugs around and it sounds the same.

Here is a video:
https://www.youtube.com/watch?v=E8fjdpJ2wfY

Any ideas to what it might be?

Falken Hawke

Try using the plugs that were replaced.  If problem is corrected, identify differences between old and new plugs, including part #'s

If problem persists, determine if a cylinder isn't firing by checking the temperature of the exhaust runners.  No contact thermometer is best but also can be done by misting water onto the runners after starting engine.

If one cylinder is not working, swap plugs and determine if the fault follows.

After completing these, it will be easier to determine the next course of action.
QuoteShyamalan said it was his kids that told him about Avatar, and that it was they that urged him to make the film.

Conclusion: Shyamalan hates his kids.
-jollyjack on Deviant Art-

Armandorf

+1

Also, think in what you touched, spark plug boots could be loose., if the rubber is cracked or the fit is not tight consider changing them.

SMF spam blocked by CleanTalk