Can you help me find where do these washers/sealants fit in my GS500E engine?

[filipedbc]

Hi guys,
hope everything is OK you guys.

I'm in a long run trying to rebuild my GS500E Slingshot engine from 92. I've bought a complete gasket kit for my engine, however I could not find the spot for the following washers/sealants. Could you help me? Please see the photo.

[aconti2]

The ones all the way on the right look like the exhaust gaskets (where they attach to the engine, dont ask me how I know lol.) The ones on the left look like the intake boot O Rings. No clue about the ones in the middle.

[Meukowi]

The ones all the way on the right look like the exhaust gaskets (where they attach to the engine, dont ask me how I know lol.) The ones on the left look like the intake boot O Rings. No clue about the ones in the middle.

you mean the third ones for exhaust, the pic expands to the right, theres more o rings and washers.

Hi guys,
hope everything is OK you guys.

I'm in a long run trying to rebuild my GS500E Slingshot engine from 92. I've bought a complete gasket kit for my engine, however I could not find the spot for the following washers/sealants. Could you help me? Please see the attached photo.

cant find any information about the kit on web? honestly i have no clue where most of these goes to.. but if theres 4 of same kind it might be the carbs, 2 for exhaust, etc.. just gotta use brains on these kits 

[filipedbc]

Thank you guys

@Meukowi, been thinking about that for weeks... A pair of rubber normally goes to admissions and a pair of metal to exhaust. If they are four, they go to some sort of cover.
But this is not easy... The tech manual does not have the info and I could not find any instructions for any gasket kit, regardless of the brand!

I may have found the location of the first ones.  It looks like the orings that go with the valve covers screws...
Also thought that the third ones were from the exhaust, but the size does not match.
I'm intrigued about the red spacers/washers. No ideia where they go!

[aconti2]

The ones for the exaust sit in the opening on the engine not on the end of the pipe. And yes I did miss the right side of the pic!

[filipedbc]

The ones for the exaust sit in the opening on the engine not on the end of the pipe. And yes I did miss the right side of the pic!

I'm not seeing it. Could you get a photo where it should be? Thank you

[ShowBizWolf]

Not everybody has a pic handy of where exhaust gaskets should go so I figured I'd share one I have. Hopefully it helps!

I already installed new gaskets when I took this pic.

[filipedbc]

Not everybody has a pic handy of where exhaust gaskets should go so I figured I'd share one I have. Hopefully it helps!

I already installed new gaskets when I took this pic.

Thank you so much. It looks like these are not exhaust gaskets. They are smaller and have a round format. Any other options?

[aconti2]

Yeah looking back at the ruler thats true they are small. Maybe it's one of those kits that include everything you need that works for multiple bikes? The only other metal gasket/washers I recall where the crush washers for the cylinder block.