GStwin.com GS500 Message Forum

Main Area => For Sale / For Trade / Wanted / Hot Deals => Topic started by: JamesG on February 06, 2003, 07:25:47 AM

Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 06, 2003, 07:25:47 AM
{edited and copied/moved from general discussion by moderator}

I remember jamesG was taking orders for his custom race tail and I thought those posts got lost in the old posts so I copied the thread and deleted the unrelated posts (leaving the original thread intact in General Discussion forum!). Did this so I can make it sticky. He also has full carbon fiber fairings available...



By JamesG
...I have this "superstock" GS tail which you have NOW in carbon fiber or carbon kevlar for the low price of $150!
(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.knology.net%2F%7EARS%2FGSIMGS%2FBLgstail.jpg&hash=34018e8783b113118d0858f9851adcad61d18c8d)

Thanks,
Title: Rear Solo seats for sale-by JamesG
Post by: octane on February 06, 2003, 08:50:26 AM
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 06, 2003, 09:04:32 AM
Afraid not.  This is a no compromises, racing tail. The seat pan is enclosed and is about an inch shorter than stock.  I made it to be as absolutely minimal and as light as possible, the whole thing weighs less than 12 ounces!

Now, it will fit around a stock subframe, inner fender and taillight. So if you wanted to mount it around a stock seat, you could cut the seat base portion out with a dremel tool and it would fit.  But don't tell me that when you buy it.   ;)
Title: Rear Solo seats for sale-by JamesG
Post by: octane on February 06, 2003, 09:36:52 AM
Damn. Makes me wish I didn't buy that seat now! Do you have any more pictures from different angles? How "no compromises" are we talking? Could I take a long afternoon ride and not come home sterile?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 06, 2003, 10:07:41 AM
(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.knology.net%2F%7EARS%2FGSIMGS%2FCafeGS.jpg&hash=8ac27dc22e9b0444ccb0b306aa90b910c57a82a1)
Take your seat off and tape a phone book to the subframe rails. Thats about how low it sits.
I was suprised at how comfortable it was even sitting on the plain seat.  The way I came up with for mounting it is to zip tie 1"x1"x12" blocks of high density foam to the frame rails and the seat part of the tail is supported by that. With the flexibility of the CF it acts as a cushion. I would say it doesn't even really need any seat foam except to raise the seat hight for comfort.
I wouldn't want to ride it all day on the highway, but it was disigned for road racing where you don't spend too much time sitting around. ;)    [/img]
Title: Rear Solo seats for sale-by JamesG
Post by: JohNLA on February 06, 2003, 10:33:13 AM
That is one way cool looking GS. Thanks for posting :D
Title: Rear Solo seats for sale-by JamesG
Post by: octane on February 07, 2003, 10:05:31 AM
Title: Rear Solo seats for sale-by JamesG
Post by: octane on February 10, 2003, 11:31:37 AM
Well then sir, put me on the list. If you want a deposit, email me your mailing address and give me an eta on delivery. Thanks.
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 11, 2003, 09:02:58 PM
Groovie...

I suppose I should put something in the classifieds...
Title: Rear Solo seats for sale-by JamesG
Post by: octane on February 12, 2003, 07:13:36 AM
Title: Tail section...
Post by: The Buddha on February 12, 2003, 08:39:41 AM
I know someone who will kill for that tail section. Now the seat part is covered over?? So we are supposed to glue a mouse pad on the carbon fiber and sit directly on it?? Well it should be fine then. Would it carry the weight of a fully grown adult ~200+ lbs.
Thanks.
Srinath.
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 12, 2003, 08:58:28 AM
oct- Yeah man, that would be cool, and email me the advertising info. I have wanted to start putting the word out when I started getting some cash flow.

srinath- yeah the seat pan is part of the tail ala; a "superbike" tailsection.
The tail's seat sits on foam attached to the seat rails so it has some natural flex and cushion.  You can do the mouse pad thing, but Lockhart Philips sells seat foam that you can use to look more "pro" and to raise the seat hight. I personally just sit on bare seat as it is easier to slide side to side to hang off.

I literally garentee that it will hold up for anyone.  I've already thrown one down the road  :oops: and except for some road rash it held up fine.
Title: Rear Solo seats for sale-by JamesG
Post by: suzukimad on February 12, 2003, 02:18:50 PM
Jame`s  hope you will ship to england ;)

When you start making the tailsection

I place a order for a street one.


                     cheers :D
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on April 23, 2003, 10:25:06 AM
Cool!  Thanks man!
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on April 23, 2003, 10:29:12 AM
If you're ever interested in making up a solo seat cover for over the stock seat rear portion let me know...


Like this but maybe a little more a hump or some added height (from a bandit1200):

(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.b12power.com%2Fremote%2FBSBanditSoloSeat.jpg&hash=e3acc18bf7a9a8e2dfd814b2194cdf6d3d083ffd)
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on April 23, 2003, 08:36:08 PM
Actually I'm working on one now.

I have a tail that didn't come out too well (  :x )  that I am chopping up to use as a prototype for a solo cover.

stay tuned!
:)
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on April 23, 2003, 08:48:38 PM
that's great! Unfortunatelyfor me I'll have to assume you're doing one for the 89-00 model seats and not my 01 seat... :(

maybe we can work something out when the time comes?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on April 24, 2003, 06:13:09 AM
How about you buy me an '02 GS and I'll make a solo cover for ya.
:thumb:
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on April 24, 2003, 09:42:05 AM
sounds fair... :nana:
Title: Rear Solo seats for sale-by JamesG
Post by: Pam G on April 30, 2003, 03:39:33 PM
Quote from: JamesG
I wouldn't want to ride it all day on the highway, but it was disigned for road racing where you don't spend too much time sitting around. ;)    

Unless you are endurance racing!
Greg had one or 2 issues with the tail.
He will be contacting you sometime, unless he has already done so.
Title: Great lookin seat, how much and how long for delivery?
Post by: Argon5W on April 30, 2003, 06:35:28 PM
I really like the seat.  Can you give details on price and delivery?

Richard
Title: Rear Solo seats for sale-by JamesG
Post by: Pam G on May 01, 2003, 06:22:14 PM
From the first post:

By JamesG
...I have this "superstock" GS tail which you have NOW in carbon fiber or carbon kevlar for the low price of $120!

James would have to fill you in on the shipping info.
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on May 05, 2003, 12:52:20 PM
Quote from: Pam G
Greg had one or 2 issues with the tail.
He will be contacting you sometime, unless he has already done so.

Thats the life of a guinea pig!  :P
Title: Rear Solo seats for sale-by JamesG
Post by: The Antibody on May 05, 2003, 03:07:29 PM
I second pablo's idea. I could use one for my 2002. Same as 2001.

 -Anti
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on May 06, 2003, 08:08:38 AM
hmmm...

Maybe if I can get ahold of a new tail, I might make a copy of it instead of modifying an SV tail.
Perhaps even making a conversion kit to retro fit the new tail onto older bikes....

hmmm...
Title: Rear Solo seats for sale-by JamesG
Post by: franke3c on June 04, 2003, 10:32:00 PM
This tail will only fit certain year bikes? if so, which years?
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on June 04, 2003, 11:43:42 PM
Quote from: franke3cThis tail will only fit certain year bikes? if so, which years?


This tail is made for older style bikes, from 89-00. In 01 the body style changed-wider, more capacity gas tank, different design seat and tail peices among some other smaller details. They don't easilt swap from late to early bikes.
Title: Rear Solo seats for sale-by JamesG
Post by: JeepWrangler8 on July 03, 2003, 12:54:06 PM
I am fortunate that I got a hold of one of these tail sections from James.  He was great to work with and the seat looks great on my bike.  He is right the seat is surprisingly comfortable... I am putting on a seat pad just for added comfort.  I love the look and it goes great with my new Fairing.  Whole new looking GS... Look for pics coming soon!  Thanks James for the hard work and getting the seat to me quick!  I also re-enforced that back section of the tail for the occasional passenger!   Love it!  -Ryan
Title: Rear Solo seats for sale-by JamesG
Post by: bmcmahon79 on July 18, 2003, 08:21:20 AM
I would like to order just the tail section please email me with the payment details. My zip code is 61859.  

thanks  :thumb:

bmcmahon79@msn.com
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on July 18, 2003, 12:12:37 PM
any word on a solo seat cowl?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 18, 2003, 12:23:11 PM
Yeah.  I'm getting a tail back from dgyver (It was a prototype and too thin so I'm replacing it).
I'm gonna hack that one apart and use the back seat portion to make a solo cover mold with and the rest I'm going to use to make a mold for a "super sport" version replacement for the stock bodywork.

eventually.... :oops:
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on July 18, 2003, 12:25:38 PM
sort of cunfused, will this solo seat cover fit over a stock everything  and seat for a '99
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 18, 2003, 12:32:09 PM
Yeah thats the plan.  I gonna try to get it to even cover the gel seat too!
Title: Rear Solo seats for sale-by JamesG
Post by: Toecutter on July 18, 2003, 12:33:05 PM
Quote from: klimbersort of cunfused, will this solo seat cover fit over a stock everything  and seat for a '99

I'm pretty sure that, in order to install the solo seat, you have to remove the stock seat and all its associated hardware like the release.  You then zip-tie foam blocks to the frame to support the solo seat.  You sit directly on the solo tail.  If you like, you can glue a seat pad or a cut mousepad or something to the solo tail for "comfort".  If you use this tail, it's not going to be something that you can switch back to stock in a convenient manner.  

I believe some people have supported the rear part so they can still carry a passenger.
Title: Rear Solo seats for sale-by JamesG
Post by: suzukimad on July 18, 2003, 12:33:15 PM
Will there be a waiting list,for the seat?..
What will be the shipping cost to uk?
And how will you take payment for over the pound?


          :cheers: Tony..Ps put me down for one..
           Bike is a 1997 :thumb:
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on July 18, 2003, 12:36:33 PM
sorry toecutter to add more confusion, i was inquiring just abou the seat cowl idea to fit over stock seat and such
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 18, 2003, 12:39:46 PM
errr... which one?  :?

ok a bit of clarification here;

solo seat aka: superbike tail = A complete race tail section with an enclosed seat area and built up rear seat/number plate. Not advised for street bikes.

solo seat cowl = just a covering to go over the rear passenger seat.

supersport tail = CF version of the rear bodywork. Allows use of stock seat.
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on July 18, 2003, 12:40:46 PM
i was interested in a solo seat cowl
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 18, 2003, 01:03:31 PM
ok hehehe

Keep in mind that I have to replace dgyvers tail first and I have to repair my mold before I can do that. Plus I have to finish the lower and a CF GS tank first. Plus I have a few SV and MZ Skorpion projects too, in addition to regular production runs.
:cry:
I can do several things concurrently, but its gonna be a few months at the least until I can get to it...
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on July 18, 2003, 01:09:01 PM
good god, take a breath!!!

i was curious how you made the molds.  i have been researching fiberglass stuff out of curiousty

do you use a positive mold and wrap or do you lay into a negative mold,  i have mold resources galore ( i work for a climbing hold company)

i was tempted to take this on for fun, was thinking about making a positive foam shape, creating a latex mold and laying fiberglass into it...any ideas?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 18, 2003, 01:42:16 PM
yeah.
don't do it.
Its such a pain in the ass... :x
:P

JK, Its ok just alot of work, and I get lots of ideas and projects but don't have the time to keep up.
Wanna move down here and do some layup?
I can feed you. :D

Latex won't work for FG or CF. They have to be ridgid negative molds. Basically reverse fiberglass copies of what you are making.  I vacuum bag them too.
Title: Rear Solo seats for sale-by JamesG
Post by: chimivee on July 18, 2003, 03:46:32 PM
Quote from: JamesGI gonna try to get it to even cover the gel seat too!

Yes, please!
Title: Rear Solo seats for sale-by JamesG
Post by: mrslush50 on July 18, 2003, 03:50:24 PM
i too would be interested in a solo seat cover for '01-'02 bikes.
Title: Whoooohoooo
Post by: The Buddha on August 13, 2003, 10:53:01 AM
Quote from: JamesGok hehehe

Keep in mind that I have to replace dgyvers tail first and I have to repair my mold before I can do that. Plus I have to finish the lower and a CF GS tank first. Plus I have a few SV and MZ Skorpion projects too, in addition to regular production runs.
:cry:
I can do several things concurrently, but its gonna be a few months at the least until I can get to it...


CF tank...sounds good and the supersport tail also...Now is the the 2 side panels and little tail piece style architecture or is more of the lockhart type one with cut out base and tail lights meant to go on top of the seat.
Those Sv's can wait...GS tank in CF please...
Cool.
Srinath.
Title: Rear Solo seats for sale-by JamesG
Post by: Rema1000 on August 14, 2003, 09:49:59 AM
Quote from: klimberi have been researching fiberglass stuff ... was thinking about making a positive foam shape, creating a latex mold and laying fiberglass into it...any ideas?

I have made a few small glass-over-wood-core boats, and had thought of doing something similar to glass-over-foam-core for a rear seat: buy a ripped-up seat on e-bay, remove the vinyl, cut-off the stock foam and replace with a foam blank, then hot-wire-cut the back-end down to shape, and glass over it (no mold needed; vaccum bag optional, but I've never needed that for boats).  Then build-up the front seat with closed-cell foam from REI.  Optionally cover (my kayak seat is bare foam and quite comfortable).

I use the backseat for cargo too much to keep a sporty seat on all the time, so I'd need something interchangeable.
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on October 14, 2003, 10:06:32 PM
Quote from: JamesGHow about you buy me an '02 GS and I'll make a solo cover for ya.
:thumb:

JamesG,
If I sent you my '01 rear tail bodywork and seat would you be able to use that to make a mold for a solo seat cowl? I'd be willing to part with my weekly rides for a while in the winter if you could commit some time to it.

If so, how long would you need my parts and how much you think it would cost?
Title: Rear Solo seats for sale-by JamesG
Post by: Rich500 on October 14, 2003, 10:22:37 PM
Good THinking Pantablo,
I think there would be a pretty decent demand for these. I know I would buy one in without question!!!
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on October 15, 2003, 07:46:17 AM
Quote from: pantablo
JamesG,
If I sent you my '01 rear tail bodywork and seat would you be able to use that to make a mold for a solo seat cowl? I'd be willing to part with my weekly rides for a while in the winter if you could commit some time to it.

If so, how long would you need my parts and how much you think it would cost?

Yeah that would be cool.  I want to make a mold of the new tail but was going to wait until getting our new '04. This will allow me to get a jump on it and be able to concentrate on the fairing when I get it.

You just want a solo cover? How about a whole tail?

How about this, you let me borrow your tail  :)  for a few months to make a couple of molds from it. and you can have the prototype cowl or a full tail?

PM or email me.
James
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on October 15, 2003, 08:44:41 AM
MONTHS?!
do you remember I live where theres riding all year round?
Ouch.

I'll PM you.
Title: Rear Solo seats for sale-by JamesG
Post by: Zarathustra on October 15, 2003, 11:57:11 AM
i'm about to store my bike for the winter in a few months, and then won't be using it for probably 3 months or so.  if you need a tail to take a mold of, i could probably ship you mine in december.
Title: Whiny ass...
Post by: The Buddha on October 15, 2003, 01:33:48 PM
Quote from: pantabloMONTHS?!
do you remember I live where theres riding all year round?
Ouch.

I'll PM you.

Yea yea Whiny ass Pablo (had to pass it on after werase called me...) cant ride bike without tail section... booo hooo hooo
Cool.
Srinath.
Title: Re: Whiny ass...
Post by: pantablo on October 15, 2003, 03:09:07 PM
Quote from: seshadri_srinath(had to pass it on after werase called me...)
Cool.
Srinath.

pass what on? WTF are you talking about? You dont have an 01+ model so what are you passing on?
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on October 15, 2003, 04:43:36 PM
Quote from: Zarathustrai'm about to store my bike for the winter in a few months, and then won't be using it for probably 3 months or so.  if you need a tail to take a mold of, i could probably ship you mine in december.

damn you! But I want a free solo cowl...[/b]
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on October 15, 2003, 07:10:19 PM
When you guys finish fighting it out let me know.

;)
Title: Rear Solo seats for sale-by JamesG
Post by: pantablo on October 15, 2003, 09:28:40 PM
Nah, Zara's got a real winter. If he's gonna pput the bike away for the winter then it makes sense he loan you his rear body and seat.

:cry:

Would be nice to make a full race seat based on the 01+ that fits on the 89-00, now wouldnt it.

I'll put my order in now for a solo seat cowl.
Title: Rear Solo seats for sale-by JamesG
Post by: Adam R on October 17, 2003, 02:08:28 AM
QuoteZarathustra wrote:

i'm about to store my bike for the winter in a few months, and then won't be using it for probably 3 months or so. if you need a tail to take a mold of, i could probably ship you mine in december.


3 months!?  When I was in Minnesota in 2000-2001 it snowed November 1, and the snow didn't melt until almost May.  I call that a 5 month winter!

I was going to ride my CBR600 from Washington DC to St. Paul at the end of March.  Boy I was I glad that I decided to fly instead.  I'll never forget the pilot saying "current ground temperature in Minneapolis, 5 degrees!"   :o
Title: Rear Solo seats for sale-by JamesG
Post by: Zarathustra on October 17, 2003, 10:50:22 AM
last winter it stayed warm pretty late, and i guess i'm hoping for the same thing.  i rode my bike until right around christmas last season, as it took forever to snow.  i then got to start riding again in late march/early april.  that's where my estimate kicks in.  it does get pretty damn cold here, but i just try to stay out of the snow.
Title: Re: Whiny ass...
Post by: The Buddha on October 17, 2003, 11:18:18 AM
Quote from: pantablo
Quote from: seshadri_srinath(had to pass it on after werase called me...)
Cool.
Srinath.

pass what on? WTF are you talking about? You dont have an 01+ model so what are you passing on?

Too bad the title isn't displayed for the replies... I am passing on to you ... as the title to my reply says "whiny ass" ...
Cool.
Srinath.
Title: Rear Solo seats for sale-by JamesG
Post by: WAP on October 19, 2003, 12:25:39 PM
JamesG, i really like the look of your GS. I've been toying with the idea of adding a solo-seat tale, and then painting tail, gas tank, and new fairing the same color (maybe some kind of dark blue...), and this tale looks really cool man. I'm gonna mull it over a while but i'll probably be contacting you soon in the future!
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on October 19, 2003, 10:21:11 PM
Cool dude!

Let me know but just keep my piss poor turn around time in mind.
(I work for a living, this is just for grins).
Title: Rear Solo seats for sale-by JamesG
Post by: JasonB on October 19, 2003, 10:52:41 PM
Quote from: pantablo
Would be nice to make a full race seat based on the 01+ that fits on the 89-00, now wouldnt it.

That would be nice. New style seat and tailight etc for older bikes.
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on October 20, 2003, 05:13:01 AM
I am pondering makeing an "upgrade" kit. Depends on hard it will be to adapt the new tail bodywork to the old tank, seat, and subframe.
Title: Rear Solo seats for sale-by JamesG
Post by: Jundie on October 29, 2003, 11:19:35 AM
cool stuff, are they unpainted? and do you ship to europe and how much will it cost then?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on October 29, 2003, 11:46:16 AM
It is normally primered, but I can make it "naked" CF.  Sure I will ship to Europe.

What are you interested in?

James
Title: Rear Solo seats for sale-by JamesG
Post by: Jundie on October 29, 2003, 11:53:47 AM
primered is good, i was planning to paint it white and add blue striping.
but what will it cost to ship it to the netherlands, it's light but its big so im confused, hope its not hundreds of dollars  :lol:
Title: Rear Solo seats for sale-by JamesG
Post by: Jundie on October 29, 2003, 12:14:33 PM
damn, never mind, I just calculated what the shipping would cost. according to TNT it will cost around 300 dollars. thats way over my head :o
Title: Rear Solo seats for sale-by JamesG
Post by: The Antibody on November 13, 2003, 08:19:34 AM
2001+ passenger cowl would make The Antibody a happy boy. Ha-a-appy! HAPPY!

 -Anti
Title: Rear Solo seats for sale-by JamesG
Post by: RoundBall on December 30, 2003, 05:56:00 PM
Someone made this (https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.motokiev.narod.ru%2FImages%2FSuzuki_sv650.jpg&hash=8d2597d61efa6e83cb069ea9d284c0fa0be59b83)
Title: Rear Solo seats for sale-by JamesG
Post by: tr1200 on February 06, 2004, 01:11:05 PM
I'm interested in a race-tail.  Please e-mail me w/ details : tn1413@sbc.com. Thanks.
Tom Nichols WSMC#60
Title: Rear Solo seats for sale-by JamesG
Post by: klimber on February 25, 2004, 06:48:02 AM
anything everyhappen with the passenger seat cover/cowl?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on February 25, 2004, 12:26:22 PM
Still working on it.  Right now I can't even keep up with orders for race tails!

I'm waiting for someone to fall down and wreck one of my tails so I can use it to mold a solo cover from.

JUST KIDDING!!! :mrgreen:
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 25, 2004, 02:04:18 PM
I will be back to Jennings shortly.... :mrgreen:
Title: Rear Solo seats for sale-by JamesG
Post by: rt_fz1 on March 22, 2004, 06:28:25 PM
Just received my race tail today from James and I have to say I'm very pleased! :thumb:   I've been running the bike with the stock seat and plastic and this solo seat is going to knock a few pounds off the total weight of the bike!  Thanks again James!  :cheers:

Rich

PS:  History suggests that I might be a prime candidate to crash test your tail, but I won't be racing at Gratten until June so you'll have to wait!  :)
Title: Rear Solo seats for sale-by JamesG
Post by: paui on April 02, 2004, 11:33:56 PM
do u have any pictures of the supersport (uses stock seat) tail?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on May 24, 2004, 06:39:10 AM
Don't have one yet.
I am going to try to take a "stock" mold of the new style tail before I build a race tail of it. But I don't know when I'll be able to get around to doing the same for the old one...
Title: Rear Solo seats for sale-by JamesG
Post by: tt_four on June 10, 2004, 05:31:53 PM
JamesG,

when you get the solo seat cowl made, what kinda price you think it'll be around? i'm very interested, any estimate of how long it might take until you're selling them?
Title: Rear Solo seats for sale-by JamesG
Post by: jusfuris on June 20, 2004, 11:45:53 PM
would this seat be ok for everyday riding if i put a nice seat on it? or is it strictly race only? why is it "no compromises"?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 04, 2004, 02:57:18 PM
I really say its just for racing, because I designed it to be as absolutely light as possible. So it doesn't use the seat base, the tail is enclosed and rests directly on the sub-frame rails.
Having said that, several guys HAVE bought them for their street bikes, and I haven't gotten any nasty letters from their proctologists yet, so....
:dunno:
Title: Rear Solo seats for sale-by JamesG
Post by: TeBo on August 12, 2004, 05:43:01 PM
hey have any update on that CF gastank yet?  If so, would you have a package deal for the OEM CF replacement and the gastank?  maybe add the solo cowl as well??  Me kinda interested in a full carbon fiber GS  :) .  If not yet, how much would you estimate it to?
Title: Rear Solo seats for sale-by JamesG
Post by: JamesG on August 12, 2004, 08:19:02 PM
I just encased a 01+ tank in fiberglass this week, building up a mold for it. Still need to do a mold for the bottom of the tank, that will be the hard part, and will have to wait until I get caught up on the race lower and some other projects. But its moving along.

I plan on having a composite 01+ tank and rear bodywork ready around the new year, as a "retrofit" kit for older bikes.
Title: Rear Solo seats for sale-by JamesG
Post by: TeBo on August 12, 2004, 08:51:50 PM
Well I have a '98.  I would love to have full CF panels on my bike..  that would be sweet..  If you do plan on making htem, tell me once done, and I'll definitely order..  thanks
Title: Rear Solo seats for sale-by JamesG
Post by: frankieG on August 31, 2004, 06:21:56 PM
do you have a solo cover for a 02 GS made up yet?
Title: Rear Solo seats for sale-by JamesG
Post by: TeBo on September 05, 2004, 05:06:00 PM
If you don't have the retrofit CF 01+ tank for the Pre 01 GS, do you have a pre 01 GS tank in CF??  I for sure want the CF panels (the ones that would fit the stock seats.)  do you ahve those ready??
Title: Rear Solo seats for sale-by JamesG
Post by: Mk1inCali on September 14, 2004, 12:41:50 PM
Just a heads up, I'll be buying a retrofit kit in clearcoated CF for my '00 when you get 'em done.  New style tank, and new style race or solo tail.  

Keep us updated!


Tony
Title: Rear Solo seats for sale-by JamesG
Post by: TonyDiaz_fls on September 21, 2004, 04:44:21 AM
James,  I'm interested in the tail for my 2004 GS.  Can you please contact me.  Thanks.
tdiaz@hotmail.com
Title: Rear Solo seats for sale-by JamesG
Post by: EazyAsOne23 on October 17, 2004, 06:17:41 PM
yeah i want a tail for my 04 or a seat cowl or something
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on October 31, 2004, 06:41:14 PM
Quote from: JamesGI'm waiting for someone to fall down and wreck one of my tails so I can use it to mold a solo cover from.

JUST KIDDING!!! :mrgreen:

I just happen to have a slightly rashed one  :mrgreen:
Title: Rear Solo seats for sale-by JamesG
Post by: Dom on November 14, 2004, 10:25:26 PM
Full CF tank?  Do you epoxy in the mounting nuts and petcock valve?  Does the gas eat away at the resin?  I can't wrap my head around this. :?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on December 03, 2004, 08:02:05 AM
I picked up the molds from James yesterday. I will need a couple weeks to get comfortable with the molding process before I have sellable parts available. I will post a list of current molds later as I still need to sort through all the stuff I got.
Title: Rear Solo seats for sale-by JamesG
Post by: quinnbozz on December 07, 2004, 11:41:11 AM
:o  :? oHHH the pain  :?  :? i am so confuzzed :(

can we see a list of ALL!! the different options and for what modle like IE.

 89-00____________________01-?_______________04-?

option 1 in CF/CK/FG_______option 1__in CF/FG___option 1
 
option 2__________________option 2____________option 2

or something like that?

i think it mmight help a little. cause i have a 90 so at this point i have NO clue what options i have, so i have to ask.  but with a chart . i would know so the first step would be cut out and the post would flow a little more. but
it is just an idea maby i am the only one confused.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on December 07, 2004, 10:56:25 PM
Current available molds:
- GS500 upper race fairing $300 ($600 complete race bodywork kit) Click for upper pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/GSupper01.jpg)    
- GS500 lower race fairing, fits above upper Click for lower pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/GS_CFlower01.jpg)
- GS500 GP race tail 89-00 (seat pan only) $150 Click for right  pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/GS89-00racetailright.jpg) Click for left pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/GS89-00racetailleft.jpg)
- GS500 stock tail 01+ (uses stock foam seat) $100 Click for pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/GS01tail01.jpg)
- SV650 hugger 98-02 $75 Click for pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/SV1hugger0201.jpg)
- SV650 front fender 98-02 $50 Click for pic (http://img.photobucket.com/albums/v64/dgyver/BodyWork/SV1fender0101.jpg)
- MZ Skorpion front fender $50
- MZ Skorpion hugger $75

Work in progress:
- SV650 solo tail 98-02 (uses stock foam seat)
- SV650 front fender 03+
- TL1000R belly pan
- TL1000R/GSXR front fender
- Katana GSX600/750 front fender 89-97
- GS500 front fender
- GS500 GP race tail 01+
- GS500 gas tank 01+ **on hold**


All of these parts can be made from carbon fiber, carbon/kevlar or fiberglass. I only have carbon fiber and very limited carbon/kevlar (blue) at this time. Really need the c/k for reinforcements in certain parts. Eventually I will have fiberglass and more kevlar color options.

Prices listed do not include shipping. Shipping in the continental USA via FedEx Ground. All other overseas and international via USPS. Insurance is included.
Title: Rear Solo seats for sale-by JamesG
Post by: Dom on February 04, 2005, 08:08:44 PM
How's progress?  :)
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 05, 2005, 03:22:51 PM
The 01+ race tail is ready to pull a mold from. Planning on next week with a part to follow.

Still working on the lower for the full fairing, about 40% complete.

Hopefully I will have a chin fairing in a couple of weeks to take a mold from.

Started prepping a TLR stock belly pan to pull a mold (not like anyone here wants a CF one).
Title: Rear Solo seats for sale-by JamesG
Post by: johnel on February 07, 2005, 06:21:30 PM
I'm gonna want a rear solo seat for an 89 gs as soon as I scrape up the money. Do you need lead time? Do you need cash up front? Is the cf seat still 150 bucks? Thanks John
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 07, 2005, 06:38:01 PM
I am planning on making some extra parts to have on hand, especially the race seat cowls. If I do not have the part already made then I will need 1-2 weeks to make one. Payment is not needed until it is ready to be shipped. Yes the price is correct.
Title: Rear Solo seats for sale-by JamesG
Post by: apbrian112 on February 08, 2005, 11:36:41 PM
is a 89-00 seat cowl in the works? it wasn't listed on the "future projects" list. i guess it's just wishful thinking on my part. but literally, i would  :guns:  someone for a CF seat cowl for my 98. ah well...
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 09, 2005, 06:45:27 AM
After posting that list and seeing all the comments regarding them, it is something that I have been thinking about making. I have several prior commitments that need to be completed first.
Title: Rear Solo seats for sale-by JamesG
Post by: Mk1inCali on February 09, 2005, 04:45:34 PM
I've got a belly pan that I stole from Danny before he sold his bike (he never mounted it up.  Do you want pictures of it, I'd be willing to ship it to you...
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 09, 2005, 08:09:36 PM
Quote from: Mk1inCaliI've got a belly pan that I stole from Danny before he sold his bike (he never mounted it up.  Do you want pictures of it, I'd be willing to ship it to you...
Please take some pics of it and the mounting hardware.

As I have been making the master for the lower of the full fairing set, I have been thinking that I could use part of that design to make a chin fairing from. I just never have enough time.....
Title: Rear Solo seats for sale-by JamesG
Post by: Mk1inCali on February 14, 2005, 12:44:29 AM
I'm actually not going to use it...There are 3 complete mounting brackets, but one is broke, and I'm not too keen on taking on another project for my bike right now.  If you want it, I can ship it to you, you pay shipping and it's yours with the brackets and everything.  PM me if you are interested, otherwise, I'll get picts of it out to you by the end of this week.  Got school every night after work until Friday, so it might be Friday before I can get picts up on my yahoo site.  I'll post here again when I get them up.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 14, 2005, 06:24:06 AM
PM sent  :thumb:
Title: Rear Solo seats for sale-by JamesG
Post by: stevemac12073 on February 18, 2005, 10:11:19 PM
are any of the solo seats ready? please, say yes just to make me happy.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 20, 2005, 03:04:47 PM
Sorry but I have been sick the past 2 weeks, so not much has been done.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 24, 2005, 07:15:20 AM
I updated the list with the latest status on available mold and prices.

Hopefully I will have a mold for the GS chin fairing very soon. I should have a part to work with this week.
Title: Rear Solo seats for sale-by JamesG
Post by: Jake D on February 24, 2005, 02:47:56 PM
Is injection molding a process that would be viable for any of these projects?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on February 24, 2005, 02:55:36 PM
Quote from: Jake DIs injection molding a process that would be viable for any of these projects?

New molds would have to be made. These parts are vacuum bagged. Do you have access to injection molding?
Title: Rear Solo seats for sale-by JamesG
Post by: Jake D on February 24, 2005, 02:59:48 PM
YES!!!  I'm checking on it right now!  Will let you know.  

Would that work?
Title: Rear Solo seats for sale-by JamesG
Post by: quinnbozz on March 17, 2005, 09:29:27 AM
i say the first item to br tested should be the 89-00 seat cowl cover!! :mrgreen:
but thats just MY thoughts :x I WANT ONE!!
:lol: oh well

:cheers:
all
Title: Rear Solo seats for sale-by JamesG
Post by: apbrian112 on March 17, 2005, 05:34:05 PM
i agree... 89-00 first!!  :mrgreen:  puh-lease puhlease make this...
Title: Rear Solo seats for sale-by JamesG
Post by: Sprinklerhead on March 17, 2005, 09:21:48 PM
Does the GP race tail need anything to be mounted on the subframe?  Do they come primered or bare?  Any thoughts on a GS500 belly plastic?  How are the GS500 tanks coming along, will the 01+ fit on an 89 frame?  

I'm interested in buying atleast a GP tail in the next month or two.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 18, 2005, 06:35:13 AM
The GP tails will come with hardware. There is a bracket that bolts to the subframe where the seat latch mounts.

They will come bare, not primered. I do not have the resources for painting or clearcoating yet.

I am working on a lower for the existing upper, which I may be able to make a belly pan mold from. I do have a belly pan on my bike now but it has been repaired to many times to make a good looking mold from.

I have not touched the gas tanks and not sure if I will.

The 01+ tail is designed to fit the contour of the 01+ tank but will fit the 89-00 frame. I have not made a part (or even the mold) to see if it is even possible to fit against the 89-00 tank.
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on March 23, 2005, 05:39:46 PM
- GS500 GP race tail 01+ $150

Are there pics of this? :)
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 23, 2005, 06:11:19 PM
Quote from: mattford11- GS500 GP race tail 01+ $150

Are there pics of this? :)

Not yet. I still need to pull a mold off of the master.
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on March 23, 2005, 06:13:59 PM
Ok, well im pretty sure that I'm in once i see a pic of one instaled :)
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 23, 2005, 06:26:08 PM
I guess I need to make that mold instead of saying that I need to.  :mrgreen:

Actually, I have been spending most of my time finishing the master of the lower for the full fairing since it is owed to a previous buyer. Plus I want it on my bike too.  ;)
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on March 23, 2005, 09:29:11 PM
Defnitely! Especially since I'm refinacing my car to save some $ each month... to put towards bike parts LOL
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on April 01, 2005, 09:45:33 PM
any update  :dunno:  :mrgreen:
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on April 01, 2005, 10:03:35 PM
01+ race tail...there are a few small areas that I keep trying to fix. I may start to prep the master this sunday to pull a mold next week.

Lower...just few area to finish. Should be able to prep it near the end of next week to make the mold.

chin fairing...going to use the lower master to make a mold from. Might as well make my own design.
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on April 02, 2005, 12:19:15 AM
:thumb:  :mrgreen:
Title: Rear Solo seats for sale-by JamesG
Post by: stevemac12073 on April 11, 2005, 07:43:06 PM
can't wait to see these things done but i need em for a 94  :thumb:
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 05, 2005, 07:24:09 AM
Pics added for the 89-00 race tail
http://gstwins.com/forum/viewtopic.php?p=119024#119024
Title: Rear Solo seats for sale-by JamesG
Post by: Thrin on May 05, 2005, 02:51:37 PM
Quote from: DomFull CF tank?  Do you epoxy in the mounting nuts and petcock valve?  Does the gas eat away at the resin?  I can't wrap my head around this. :?

I'd like to know this also - would definately buy a CF tank...!
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 05, 2005, 06:05:40 PM
Once fully cured, the epoxy is not affected by gas. But most everyone I know of that has/had a carbon tank has leaked. Lining them is a possibility but with what product, I do not know yet.

As there are manufacturing processes that I have not yet perfected or even learned, do not expect any more of a carbon tank from me any time soon or even at all. The liability issues are very preventitive for me to sell them. There is a reason composite tanks sell for over $1,000.
Title: Rear Solo seats for sale-by JamesG
Post by: weaselnoze on May 10, 2005, 07:54:28 PM
how come no one has brought up a CF tank cover?? they make em for other bikes...  i've asked someone about this before and they said it would depend on the tanks themselves.  there is a degree of difference from tank to tank.  a consistancy, i forget wat it is called.  anyway if the consistancy from tank to tank is close enough, then a cover would be a good idea for those wanting a CF tank.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 11, 2005, 07:06:17 AM
Are you referring to one these CF tank guards (http://img.photobucket.com/albums/v64/dgyver/TLR/cftankguard01.jpg)?
I have thought about them but have not had the time to develop anything new.
Title: Rear Solo seats for sale-by JamesG
Post by: weaselnoze on May 11, 2005, 09:26:31 PM
no i meant  a full cover
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on May 12, 2005, 08:10:45 PM
Have you been able to pull a mold and take a pic of the 01+ Race tail?

:)

Matt
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 17, 2005, 11:26:40 AM
Still need to pull a mold for the 01+ race tail. It is next on my list.


Now this really SUCKS......I was going to place an order today for more epoxy and it went up 56% in price!!!!!
Title: Rear Solo seats for sale-by JamesG
Post by: cheesy on May 17, 2005, 11:41:24 AM
I really would like to see a gs500 rear hugger.  I'd be willing to pay upfront
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 17, 2005, 11:50:00 AM
Quote from: cheesyI really would like to see a gs500 rear hugger.  I'd be willing to pay upfront
shhhh.....I have started working on one.
Title: Rear Solo seats for sale-by JamesG
Post by: cheesy on May 17, 2005, 12:15:00 PM
Quote from: dgyver
Quote from: cheesyI really would like to see a gs500 rear hugger.  I'd be willing to pay upfront
shhhh.....I have started working on one.



eeek!!!  price? date?!

carbon? glass? kevlar?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 17, 2005, 12:32:41 PM
Ok...found the epoxy at a more reasonable price.  :)

The SV huggers sell for $75 in carbon, so the GS should be about the same.
Title: Rear Solo seats for sale-by JamesG
Post by: cheesy on May 17, 2005, 12:41:23 PM
Quote from: dgyverOk...found the epoxy at a more reasonable price.  :)

The SV huggers sell for $75 in carbon, so the GS should be about the same.

keep us updated!
Title: Rear Solo seats for sale-by JamesG
Post by: mattford11 on May 22, 2005, 09:46:22 PM
still looking for the 01+ Race Tail... any news?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 23, 2005, 05:14:49 AM
I will post when I have it ready.
Title: question about solo seat for '89 gs
Post by: sig04chad on May 28, 2005, 10:34:26 PM
so you can cut out the seat setion of the race tail and use the stock seat? or do you make a solo seat the just slides over the factor seat? Very interested maybe be getting one once i figure out if i can use it how i want
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 30, 2005, 05:52:39 PM
The race tail does fit over the stock seat. Not sure how much would need to be cut. The only issue would be the rear mounting bracket. It bolts to the subframe at the seat latch. A new bracket would need to be fabricated.
Title: Rear Solo seats for sale-by JamesG
Post by: poormanracing on June 04, 2005, 05:31:09 PM
just curious...if someone send you an airtech titan tail..can you make it? it uses stock seat...but it costs 250 shells...ive read people wanting to have a solo seat..with a racy tail...



hopefully someone would be kind enough to send theirs...coz ive heard bad airtech stories and not bad dgyver/jamesg stories :cheers:
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on June 04, 2005, 07:36:36 PM
I could make a mold if someone wanted loan it but my turn around is not very quick.
Title: Rear Solo seats for sale-by JamesG
Post by: poormanracing on June 04, 2005, 07:46:28 PM
Quote from: dgyver... but my turn around is not very quick.

that's ok...

now to find people in here with a titan tail...i think tails are sold seperately though from the titan kit  :dunno:
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on June 30, 2005, 02:04:16 PM
Lower for the upper is complete. To bad I just sold my bike. This is the only pic I have.

(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv64%2Fdgyver%2FGS500%2FGS_CFlower01.jpg&hash=a52673261cabd578141db963b3b508c39201985b)
Title: Rear Solo seats for sale-by JamesG
Post by: Absolute Rescue on August 22, 2005, 06:50:47 AM
am i right in guessing that the tail shown in the very first post will fit on an 05 gs? if so how do i place an order
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on August 22, 2005, 06:55:28 AM
Quote from: Absolute Rescueam i right in guessing that the tail shown in the very first post will fit on an 05 gs? if so how do i place an order
That one is for the 89-00. I have not pulled the mold for the 01+ race tail and I do not know when I will have the time.
Title: Rear Solo seats for sale-by JamesG
Post by: Absolute Rescue on August 24, 2005, 02:26:59 PM
alright cool. let me know if/when it gets pulled i'm interested
Title: injection molding not realistic
Post by: Argon5W on September 01, 2005, 05:06:23 PM
Injection molding would be a great idea if it were not for the mold cost which would be tens of thousands of dollars.  Injection molding requires a very heavy mechanical steel mold.  The pieces of the mold are clamped together under hydraulic pressure as the molten (not liquid) plastic is pumped into the cavity through multiple gates.  After injection cooling water is run in the mold.  The mold is then pulled apart and pins push the finished part out of the cavity.  The stock plastics are multiple pieces to allow this work properly.  Each of the three tail pieces is most likely made at the same time in one mold.  The entire process will take about 15 seconds per shot at the most.

Richard
www.homemachineshop.com
Title: Rear Solo seats for sale-by JamesG
Post by: tbblizzard on September 09, 2005, 09:36:13 AM
any updates on the single seat?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on September 09, 2005, 09:48:38 AM
Quote from: dgyverI have not pulled the mold for the 01+ race tail and I do not know when I will have the time.
Title: Rear Solo seats for sale-by JamesG
Post by: scottpA_GS on September 10, 2005, 07:33:00 AM
how is the chin faring going? :) any est. on a $ price for it yet.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on September 10, 2005, 03:35:05 PM
Quote from: scottpeelhow is the chin faring going? :) any est. on a $ price for it yet.
Have not worked on it, no time. No idea about price.
Title: Rear Solo seats for sale-by JamesG
Post by: tbblizzard on September 12, 2005, 01:09:37 PM
any idea if maybe tails pieces from a different bike would maybe fit a gs? like the sv maybe since it's already the solo seat type.

if not i may play with it this week and try to copy the shape of the gas tank for the rear seat and just glass a cover to go over it whlie waiting for someone to make a real solo seat. kinda like busa tail piece, but maybe not so tall.
Title: Rear Solo seats for sale-by JamesG
Post by: fat_sac on September 13, 2005, 01:04:33 PM
If you're still making these things. I'm interested in a full front out of glass. Is it cheaper, or even tangible yet?
Title: Rear Solo seats for sale-by JamesG
Post by: tbblizzard on September 16, 2005, 10:21:59 AM
closest thing to a solo seat...
http://www.corbin.com/suzuki/gs500e.shtml

(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.corbin.com%2Fsuzuki%2Fsu3b.jpg&hash=d4978ca42de481b82cac598042717f41006c6551)
Title: Rear Solo seats for sale-by JamesG
Post by: nicolesuzamy on October 11, 2005, 12:28:36 AM
Am I missing something here?  I'm probaby a late late late comer to the GStwin site, yes?  ... Can someone repost the picture of this solo seat. I would love to see it!
Title: Rear Solo seats for sale-by JamesG
Post by: Alphamazing on October 11, 2005, 06:39:18 AM
From page 5 in this thread:
http://img.photobucket.com/albums/v64/dgyver/BodyWork/GS89-00racetailright.jpg

And from page 1, post 1:
http://www.gstwins.com/gsboard/index.php?topic=1212


And Dgyver, any progress on anything?
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on November 25, 2005, 05:51:13 AM
Thanks for the offer. But the last mold I made lifted the factory paint off of it. Luckily it was a part I bought. I will not make another mold unless the part is basically expendable.
Title: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on November 25, 2005, 12:51:04 PM
well the part is alittle rough as it is, (nothing that should affect the mold though) and I wouldn't mind if it gets destroyed in the process provided we can work out a dicount on a carbon one. I have no need for two because obviosly I can only use one tail piece on a bike. I will send you pics of the part and the condition its in if your interested.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on November 25, 2005, 09:42:45 PM
Every imperfection shows in the mold and then is transfered to the part. Rough masters do not make for good parts.
Title: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on November 26, 2005, 09:51:41 PM
well a little bit of bondo and spraying some primer would take care of the imperfections. I'll try to take some pics of the part and post them so you can see what we're talking about here.
Title: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on December 08, 2005, 09:20:17 PM
Alright sorry I took so long with the pics, I've been busy, but here they are.

This is the actual tail

http://i17.photobucket.com/albums/b89/gimmeaname1234/SUNP0054.jpg

these are the scrapes in the paint that are on the top

http://i17.photobucket.com/albums/b89/gimmeaname1234/SUNP0056.jpg

and this is the one really bad crack in it, (you really gotta push on that to open it up like this)

http://i17.photobucket.com/albums/b89/gimmeaname1234/SUNP0061.jpg

now a buddy of mine offered to help me out with fixing it up, (he's a fiber glass guru) so if he fixes it up perfect and I can get it to the point where its like new, and I mean BRAN NEW, bondo'd and primed, would you be interested in it? if not thats cool, just lemme know.
Title: Rear Solo seats for sale-by JamesG
Post by: dgyver on December 09, 2005, 09:07:52 PM
Let me know after it is fixed. I am not working with a part in that condition.
Title: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on December 10, 2005, 07:49:38 PM
lol, I like your posts man, straight forward and to the point, no b/s. alright well when I get around to bugging my buddy enough to get it done I'll pm you. thanks alot
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on January 19, 2006, 05:41:17 PM
Could you do me a favor and edit the pics to be a link?
Dang they are big.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on January 19, 2006, 08:25:24 PM
yes, I think I can do that for ya.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: melloGS on January 30, 2006, 12:21:52 PM
What carbon body parts do you have available for a gs500fk5? :)
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on January 30, 2006, 04:23:38 PM
The only part as of now is the one-piece stock tail.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: crezydave on February 20, 2006, 12:43:07 PM
 does anyone have a rear solo seat on a 2005 gs?
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 21, 2006, 09:04:21 PM
I will be out of production of all bodywork until further notice.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: JamesG on March 22, 2006, 07:22:35 AM
Quote from: budget speed demon on December 08, 2005, 09:20:17 PM
Alright sorry I took so long with the pics, I've been busy, but here they are.

This is the actual tail

http://i17.photobucket.com/albums/b89/gimmeaname1234/SUNP0054.jpg
...would you be interested in it? if not thats cool, just lemme know.

That is AirTech's tail. If you copied it and tried to sell it, they could sue the snot out of you...

Best bet is to just fix it up, paint it, and use it.

Title: Re: Rear Solo seats for sale-by JamesG
Post by: budget speed demon on March 29, 2006, 12:20:01 AM
cool, then thats what I'll do
Title: Re: Rear Solo seats for sale-by JamesG
Post by: GS500F_n00b on April 25, 2006, 02:39:04 PM
JamesG, does your race tail fit the 2004 GS500F? If so, are you still selling it?
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Alphamazing on April 25, 2006, 05:03:46 PM
Quote from: GS500F_n00b on April 25, 2006, 02:39:04 PM
JamesG, does your race tail fit the 2004 GS500F? If so, are you still selling it?

and...

Quote from: dgyver on August 22, 2005, 06:55:28 AM
Quote from: Absolute Rescueam i right in guessing that the tail shown in the very first post will fit on an 05 gs? if so how do i place an order
That one is for the 89-00. I have not pulled the mold for the 01+ race tail and I do not know when I will have the time.

Yay reading!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: mrdomino on June 02, 2006, 06:13:52 PM
Quote from: tbblizzard on September 16, 2005, 10:21:59 AM
closest thing to a solo seat...
http://www.corbin.com/suzuki/gs500e.shtml

(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.corbin.com%2Fsuzuki%2Fsu3b.jpg&hash=d4978ca42de481b82cac598042717f41006c6551)

has anyone seen this in person, or own this seat? feedback plx  :cheers:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: rangerbrown on July 16, 2006, 04:33:19 PM
i would so pimp that on my bike
Title: Re: Rear Solo seats for sale-by JamesG
Post by: GSnMARAUDER on July 29, 2006, 12:08:53 AM
so does the piece have full mounting systems or ways to fit the stock tail light with out any major deconstruction?
i would like to put one on  my bike i think it would help achieve the modernized caferacer look im looking for
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on July 30, 2006, 05:54:26 AM
Quote from: GSnMARAUDER on July 29, 2006, 12:08:53 AM
so does the piece have full mounting systems or ways to fit the stock tail light with out any major deconstruction?
i would like to put one on  my bike i think it would help achieve the modernized caferacer look im looking for

They attach by 4 bolts. There is a cut out for the tail light.

...But...

I wil not be making anymore. Whenever JamesG gets them back, it will be up to him then.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: okayf00l on August 21, 2006, 08:10:19 PM
Am I a day late and a buck short...AGAIN!

I wanted to get srinaths bars but.....they wont be out again until winter.

I also wanted a solo tail but.....out of production!!  Are there no more available. Anyone have one that they are looking to get rid of?  I think this mod would give my gs the look I want.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on August 22, 2006, 04:00:44 AM
Quote from: okayf00l on August 21, 2006, 08:10:19 PM
Am I a day late and a buck short...AGAIN!

I wanted to get srinaths bars but.....they wont be out again until winter.

I also wanted a solo tail but.....out of production!!  Are there no more available. Anyone have one that they are looking to get rid of?  I think this mod would give my gs the look I want.

JamesG has contacting me about picking up his molds, possibly this weekend. It will be up to him if/when he starts back with production.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: coll0412 on September 29, 2006, 06:59:32 PM
Anyone got one of these hanging around still, cuz I am converting my bike to a race bike and would love a solo seat.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: pbureau69 on October 16, 2006, 12:59:59 PM
Quote from: mrdomino on June 02, 2006, 06:13:52 PM
(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fwww.corbin.com%2Fsuzuki%2Fsu3b.jpg&hash=d4978ca42de481b82cac598042717f41006c6551)

That is so sexy.... humm...
corbin sells those eh.... IIIIIIInnnnnteresting..
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Foreverunstopable on December 25, 2006, 10:56:10 PM
Well after reading all that, the pictures have been lost of all the options offered. Can we please have a repost of updated pics so we can see what we are buying. Thanks!

:cheers:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: coll0412 on December 26, 2006, 12:45:52 AM
Dont want to be a negative nancy, but none are being made anymore....
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on December 26, 2006, 05:20:08 PM
Quote from: coll0412 on September 29, 2006, 06:59:32 PM
Anyone got one of these hanging around still, cuz I am converting my bike to a race bike and would love a solo seat.

I have an extra one, the last one in c/f that I made. $150 + shipping.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: coll0412 on December 26, 2006, 05:35:33 PM
Dibbbs!!!

I will PM you dgyver
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Foreverunstopable on December 26, 2006, 06:03:53 PM
 :icon_rolleyes: gotta  be quick round these parts. Let me know if it falls through.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: coll0412 on December 26, 2006, 06:14:49 PM
sorry bro, but I have been looking for one for the last 3 months
Title: Re: Rear Solo seats for sale-by JamesG
Post by: GSdave on March 28, 2007, 06:10:07 PM
could you make one for street use??? like with some padding
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 28, 2007, 06:47:25 PM
They are not available at this time.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: frankieG on June 03, 2007, 02:57:48 PM
CF for street would be too sweet for words
Title: Re: Rear Solo seats for sale-by JamesG
Post by: darb85 on June 20, 2007, 07:27:17 AM
anyof these still around?
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dynamic213 on July 03, 2007, 01:40:09 PM
Guess not... So when are they going to become available again?
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Mk1inCali on July 03, 2007, 06:55:19 PM
When a mod finally takes this down from it's position in the stickies.


PLEASE!!!  We cause more confusion/disappointment in this thread than all others combined!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: frankieG on July 03, 2007, 07:03:53 PM
i second that motion
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dynamic213 on July 06, 2007, 11:11:50 AM
Anyone think this would work?


(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fi35.photobucket.com%2Falbums%2Fd162%2Fevee629%2F04-05%2520gsxr%2520600-750%2520superbike%2520tail%2F04-05gsxr600-750sbtail1.jpg&hash=868e13ff7a6f29a02fc365007559c2d8f0cefdcf)


http://cgi.ebay.com/ebaymotors/2004-05-Suzuki-gsxr-600-750-Race-Fairing-Bodywork-Tail_W0QQcmdZViewItemQQcategoryZ35583QQihZ019QQitemZ290136145313QQrdZ1
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Mk1inCali on July 17, 2007, 07:19:58 AM
Not on your '02.  The rear-most seat support/subframe brace gets in the way.  If you could/wanted to weld a bit, then it could.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: average on November 25, 2007, 03:42:52 PM
I know who has one but If I told you who, he would probably kill me  :laugh:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on May 29, 2008, 01:27:22 PM
Hey everyone, I'm new to this forum and was introduced to it due to some requests to my company, asking for a solo seat cowl to be made for these bikes.  After we have received a few requests we have decided that we are going to start production on these right away.  This is a picture of the solo cowl for the Katana that we have gotten requests to see made to fit for your bikes.  Let me know what you think.
(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fcowltech.com%2Fimages%2Fblack%2520cowl%25201.jpg&hash=687977646fec23dae308fdd5b89a77e683e0ebc1)

The goal of Cowl Tech is to put the manufacturing back in the hands of the bike owners.  So tell me what you guys want to see made, post up pictures of items you want on your bike (or items made for other bikes that you want the same style for yours).  We make items in Fiberglass, ABS Plastic, Carbon Fiber.

Also if someone could inform me the year spans for what bikes are the same fitment for products.(ie. 92-98, 99+) 

Thanks and I hope that I am welcomed on this forum, and that I can help in expanding the Suzuki 500's product line.


www.CowlTech.com
Title: Re: Rear Solo seats for sale-by JamesG
Post by: bucks1605 on May 29, 2008, 01:31:50 PM
As far as changes in body style, '89-00 were the same. '01 was when they changed the tank and tail plastics as well as the seat.

I'm very excited about this opportunity.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: mojonixon on May 29, 2008, 02:41:57 PM
I personally would like to see one made for the F model, something low profile and blending with the lines of the bike. Not some big humped busa looking thing! Make one in gloss black and tell me where to send the cash!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on May 29, 2008, 04:08:13 PM
Quote from: mojonixon on May 29, 2008, 02:41:57 PM
I personally would like to see one made for the F model, something low profile and blending with the lines of the bike. Not some big humped busa looking thing! Make one in gloss black and tell me where to send the cash!

So would you rather more of a cap?  Or would you like something that is similiar to a race cowl just modified to the 500f?  What is pictured below is what we call the sleek cowl.
(https://gstwins.com/gsboard/proxy.php?request=http%3A%2F%2Fi286.photobucket.com%2Falbums%2Fll89%2FCowlTech%2FKat.jpg&hash=176584597d03e5753667fe8b2fd2436d81941efd)
Also what year bike do you have?

*Bucks1605-so 89-00 gs500f's are the same, and then 01-07? gs500f's are the same? 

Let's get this topic running again, this is your guys opportunity to state what you want!  Or to bring back something that was being manufactured or is, but is being done overseas.  When you state your idea's and/or pics of what you want, state for what bike and let's come to a consensus for who wants these parts, and what parts.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: bucks1605 on May 29, 2008, 04:16:38 PM
Anything without fairings is actually an E, not an F. I believe there are some post '01 E's, but the tank and plastics are different than the pre-'01s. But yeah that's basically it, here's a link with some info on the changes over the years. I personally would like to see a few options for the naked E models. I like the look of that sleek cowl.

http://cgi.stanford.edu/~sanjayd/gs500/Main/YearChanges (http://cgi.stanford.edu/~sanjayd/gs500/Main/YearChanges)
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on May 29, 2008, 04:49:00 PM
Thanks I appreciate that link, are the E models and the F model seats interchangeable?  Are the plastics able to be taken off an F model and mounted to an E model?

Who else likes the sleek cowl?  Or would you rather the busa style?  Thanks
Title: Re: Rear Solo seats for sale-by JamesG
Post by: bucks1605 on May 29, 2008, 04:56:13 PM
Quote from: Cowl Tech on May 29, 2008, 04:49:00 PM
Thanks I appreciate that link, are the E models and the F model seats interchangeable?  Are the plastics able to be taken off an F model and mounted to an E model?

Who else likes the sleek cowl?  Or would you rather the busa style?  Thanks

No, the gas tank on the post 01 is larger so the pre 01 seat will not work with the post 01 tank and vice versa. The F model plastics can be made to fit, it's not a simple swap. You have to fabricate mounting tabs I believe.

I would love to see some photoshop work of that busa style on a pre 01. Just to weigh the options.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on May 29, 2008, 05:05:06 PM
Ok and your saying you would be interested in a pre 01 E cowl correct?  Who would be interested in the 01+ F model cowl? 

What style would you guys like to see?  Are the seats interchangable between the E's and the F's?  Thanks!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on May 29, 2008, 05:08:19 PM
Cowl Tech... You would be better off starting a new thread instead of piggybacking on 11 pages of old info, very few will look in here.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on May 29, 2008, 06:36:02 PM
Appreciate it, I figured it would work for those who were subscribed to it.  I'll create a new one as well for everyone to post on.  Thanks!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: mojonixon on May 29, 2008, 07:51:42 PM
I would like it to be a cap style for my "F" model 07 GS, just please design it so that it looks factory, not something that looks out of place, like I said before, sleek, hugs the rear seat area and come up with a way to remove the "handle" at the rear of the seat and design the cowl to fill/cover that space. That would be what I would want.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: GI_JO_NATHAN on May 29, 2008, 08:07:43 PM
Quote from: mojonixon on May 29, 2008, 07:51:42 PM
I would like it to be a cap style for my "F" model 07 GS, just please design it so that it looks factory, not something that looks out of place, like I said before, sleek, hugs the rear seat area and come up with a way to remove the "handle" at the rear of the seat and design the cowl to fill/cover that space. That would be what I would want.
I'd be interested in something like this for my F as well.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: TGR on May 31, 2008, 07:39:37 AM
I'd be interested in one for my E series  :thumb:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on June 01, 2008, 05:20:13 PM
Please check out our new post, and please post pictures and thoughts (Along with what years) so that others can agree/disagree, and we can come to a conclusion on what needs to be made and start the production, and taking orders.  Thanks!

http://gstwins.com/gsboard/index.php?topic=41748.0 (http://gstwins.com/gsboard/index.php?topic=41748.0)
Title: Re: Rear Solo seats for sale-by JamesG
Post by: mercman on July 01, 2008, 09:34:45 AM
Found this link the other day.....Nice looking solo seat that exact replaces factory seat with no mods...Scroll down to middle of page...

http://www.whaccessories.com/GS500Accessories.htm
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Cowl Tech on July 01, 2008, 10:24:12 AM
True fact, but for ALOT of money, and that's not even painted...so will try to work a little better here for ya.









www.CowlTech.com (http://www.cowltech.com)
Title: Re: Rear Solo seats for sale-by JamesG
Post by: GI_JO_NATHAN on July 01, 2008, 11:05:18 AM
Also doesn't delete the grab handle, the '01+ one is too low profile, and the '00- one is just plan fugly.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: mercman on July 01, 2008, 02:25:31 PM
Yeah pricey it is...just wanted to show in case u hadnt seen it for ideas... :thumb:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: streetfighter on March 23, 2009, 04:43:06 PM
can somebody post some links or pictures or information for tails or solo seats for a 96 E
it is so confusing for me i dont know what works for me and what doesnt, some help would be appreciated
thank you.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on March 27, 2009, 04:30:24 AM
Quote from: streetfighter on March 23, 2009, 04:43:06 PM
can somebody post some links or pictures or information for tails or solo seats for a 96 E
it is so confusing for me i dont know what works for me and what doesnt, some help would be appreciated
thank you.

Better start a new thread.

I have asked to have this thread un-stickied since I am not making them anymore for JamesG when he was over seas. JamesG has not shown any signs of producing anything anymore.

Title: Re: Rear Solo seats for sale-by JamesG
Post by: JamesG on May 01, 2010, 08:31:31 PM
Seconded.

Even though I am back in the ol' US of A, I have no time to produce parts. I have asked Darrel if he wants the molds, and I solicit any one with interest AND experiance at composite layup to take over my products, but I won't be producing any more parts. I'm moved on to bigger if not better things.

Thanks, and I'll always have a soft spot in my heart for the GS500.

-James
Title: Re: Rear Solo seats for sale-by JamesG
Post by: adidasguy on June 09, 2010, 05:49:41 PM
For those interested, I found one here:
http://www.cowltech.com/index.php

UPDATE:

       DO NOT BUY FROM THEM! They take your money and do not ship. They are a thief.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: importslife on June 23, 2010, 04:25:56 PM
hello i'm new to the page but just wanted to put my 2 cents in i have the black/blue Corbin seat. I got it with the bike but was thinking of changing the color to a candy green so it would look dumb with this seat  :thumb:. if there is any one out there that has a lighter blue bike that wants one i would think about a trade for a stock seat in good shape mine is 92 so will not fit the "F" model sorry. i live in GA. to buy this it would be around 300+ for the seat if you would like to see pics just e-mail me and i will send some (importslife2000@yahoo.com)
Title: Re: Rear Solo seats for sale-by JamesG
Post by: SoGone12 on October 29, 2010, 09:17:33 AM
A reear solo seat sounds awesome. I have a 2006 gs500F and Im interested in a seat cowl that matches my bike (white) lol
Title: Re: Rear Solo seats for sale-by JamesG
Post by: gs500f stuntman on December 12, 2012, 05:01:44 PM
hey James,

I understand that you are making race tails for the gs500 are you making any for the f :thumb: model. I'm race preparing my bike and would love one.

thanks mate

Nathan :woohoo:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: codajastal on December 12, 2012, 05:14:01 PM
Quote from: gs500f stuntman on December 12, 2012, 05:01:44 PM
hey James,

I understand that you are making race tails for the gs500 are you making any for the f :thumb: model. I'm race preparing my bike and would love one.

thanks mate

Nathan :woohoo:
I dont think James is going to answer you. He hasn't posted here for 2 1/2 years :icon_razz:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: dgyver on December 12, 2012, 07:24:31 PM
I gave the molds back to James and he was not going to make anymore at that time. He did not have a mold for the F anyways. I did make a mold for the F and only made one for myself with no plans to make any more. Sorry.

I wish an admin would unsticky this thread.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 30, 2013, 05:41:57 AM
Back from the dead, MUHAHAAHHA.

Between 2 small kids and a work at home job I've pretty much fallen away from motorcycles. A couple of deployments overseas didn't help much either.

Came across this while searching for something else (Google is watching you...).

Yes, I still have the molds, but no I don't have the time to produce any parts.  Sorry.  However if there is anyone out there who wants the molds,  I'll give them too you if you pay the shipping.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Snake2715 on July 30, 2013, 04:10:53 PM
Nice!

I will leave that to one of the major players here. However if they dont step up?...

I am sure you will get someone to take them.
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Janx101 on July 30, 2013, 08:18:21 PM
im thinking member 'airbrush' on here that does the fibreglass huggers?! .... he seems a handy man with the resin and cloth!  :thumb:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: codajastal on July 30, 2013, 11:03:49 PM
Well, so much for James not answering :dunno_black: :dunno_black: :flipoff:
Title: Re: Rear Solo seats for sale-by JamesG
Post by: JamesG on July 31, 2013, 10:52:32 AM
LOL!
Title: Re: Rear Solo seats for sale-by JamesG
Post by: Hupjai on February 26, 2016, 03:47:05 PM
Someone step up!  :icon_twisted: