i tried taking off my mirrors today but couldn't.
do i need to unscrew the lower bolts that attach the mirror stand to the brake and clutch?
I tried to unscrew the top nut where the stem goes, it loosened a little and I could move the stem but then as I unloosened more it gets tight again.
It started to pour down rain at this point so i ran inside and thought I'd ask you guys instead.
Thanks.
Sounds like you're on the right track. The collar nut or lock nut screws down against the brake/clutch lever bracket to hold it tight. Unscrew this nut a little and the mirror stand should then unscrew from the brake/clutch bracket. It may be getting tight again because the stand is now free and can lean and cause it to seem tight in the threads.
I don't have any pictures but In know it's all counter clockwise to loosen.
Paul