so i got my wileyco can from ebay and the adapter from srinath. the can came with three bolts and three washers and a gasket. obviously the can has three holes for the bolts. the bolts should go through the adapter plate and screw into the can right? well there are no threads on the can. just 3 holes. so how do i attach the adapter to the can? anyone else have the same set up? i can take pictures if u dont know what im talkin about
sounds like you got a defective can... iirc my can has threads in those holes
shaZam!. i kno i bought a defective can but i didnt think it was the damn screw holes!? it was just supposed to be a lil scratch. i would however like to hear from someone w/ the same setup
I bought a Wileyco can....mine has the threads...
You should email them and ask them for a dif one.... Be polite and explain the defect...hopefully they'll be cool about it.
I'm expecting my Wileyco can from ebay in a couple of days and srinath is shipping me an adapter soon. As soon as they come in I'll let you know.
i've got a wileyco coming to me too next week.....i'll let you know too
Quote from: weaselnozeso i got my wileyco can from ebay and the adapter from srinath. the can came with three bolts and three washers and a gasket. obviously the can has three holes for the bolts. the bolts should go through the adapter plate and screw into the can right? well there are no threads on the can. just 3 holes. so how do i attach the adapter to the can? anyone else have the same set up? i can take pictures if u dont know what im talkin about
Oh crap... all the ones I bought had threads ... You might be better off calling them and raising hell, Yes scratches, not no threads ... and they better not make you pay shipping... after charging you $12 to ship when its closer to 7-8 bucks. Now just between you and me ... in a pinch we can tap it ... total pinch though... cos stainless doesn't tap very easy ... damn near break your arm... but its small enough that you might be able to.
Cool.
Srinath.
well i bought it from some dude on ebay. should i get a new one from him or should i go through wileyco?
anyone?
Which one works with Srinrath's flange? Or do you buy the whole thing from Srinrath? I was looking at the Dennis Kirk stuff on ebay, but wasn't sure which can you guys are using.
i got the titanium one from kirk. for a cbr
Quote from: weaselnozewell i bought it from some dude on ebay. should i get a new one from him or should i go through wileyco?
go through the guy on ebay. its his fault, selling as 'scratch and dent' not... 'scratch, dent, and no threads'
Quote from: weaselnozei got the titanium one from kirk. for a cbr
I looked and looked, and didn't find Ti with dennis krook ... oh well they dont call him dennis crook for nothing ...
Anyway call them and raise hell...
Cool.
Srinath.
my bad it was this one http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2491136005&category=35596
OK, My curiosity is satisfied... DK is supposedly reputable... so call and bring the roof down, and make them replace it free ... In case they dont ... just get a tap that will fit the holes, I believe the bolts are 8 dia 1.0 pitch thread ... common metric size ... Just get a tap and a handle and some cutting oil, and set off to work ... a vise wont even be useable ... just set it on the table and have someone hold it steady... and be patient...
Cool.
Srinath.
i dont think i have the patience for that haha. i'll get word to him tomorrow about this lil situation. damn it pisses me off. i've been so patient, waiting for it and now i cant do shaZam!. :(
i was sittin here thinkin and i was wondering somethin. what if i got the wrong can? i got the GSX-R750 96-99 can. i think that was one of the ones u mentioned srinath, right?
Hey that 96-99 can also has threads ... I got one of those too, no problem, they all have threads ... no sense having a flange can with no threads ...
Cool.
Srinath.
ok so i know what i have to do now.
Call them and bring the roof down ... if that dont work ... tap the holes ...
Cool.
Srinath.