Print Page - GS500E Rebuild Help required

Title: GS500E Rebuild Help required
Post by: Freddy on January 06, 2005, 02:13:35 PM

Hi Everyone,

I am a newby to this forum, and would like some assistence if possible.
I have just completed rebuilding a GS500E 1995, I am not sure how the fuel/breather hoses are connected up, can some kind gent/lady help out an old biker, a diagram would be nice but an explanation would be good as well.
Thanks for any help in advance. :kiss:

Fred

Title: GS500E Rebuild Help required
Post by: JetSwing on January 06, 2005, 02:21:32 PM

(http://www.bbburma.net/Scans/www_gs500_de_HoseRouting.jpg)

Title: GS500E Rebuild Help required
Post by: Kerry on January 06, 2005, 02:21:41 PM

Start with this Fuel Hose Routing (http://www.bbburma.net/FuelHoseRouting.htm) page.

If you still have questions, ask away!

Title: Nope
Post by: Freddy on January 06, 2005, 02:38:14 PM

Thank you gentlemen, I can't believe how fast that was, I am flabergasted.
I owe you a long cool one. :)

Fred

Title: nope
Post by: Freddy on January 06, 2005, 02:52:49 PM

Hi Kerry,

Thanks for that, one of the tubes has a closed end, a sort of V shape, is this the gas overflow/water drain tube?

Fred

Title: GS500E Rebuild Help required
Post by: Kerry on January 06, 2005, 03:03:41 PM

That's a fairly thick tube, yes? It should be attached to the bottom of the airbox.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Freddy on January 06, 2005, 02:13:35 PM