i'm in the process of replacing the oil, seals and wipers on the front of the 92.
my question is.... how do i get the tubes out of the lower leg? i'm used to seeing a large hex or allen bolt when tearing down dirt bikes, so this is throwing me a curve.
i have the springs out
the bolt at the bottom of the fork leg is loose, but i know it's attached to something.
tool i need is....
please help me out.
tearing down the rear for a while. i'll be back to check in a bit.
chris<pixelmonkey>:D
so in (http://www.psndealer.com/fiche/images/SUZUKI/1989/Motorcycles/1561_43.gif)
14 screws into 13
how do i keep 13 from spinning when turning 14?
thanks!
chris<pixelmonkey>:D
i drop a 7/8 inch nut down the tube followed by a socket, many extensions and a ratchet so it won't spin and remove that bolt
Quote from: pixelmonkeyhow do i keep 13 from spinning when turning 14?
See the
Bad Day Wrenching on the GS thread for a few concrete ideas.
thank!
making another trip to lowes tomorrow!!!
chris<pixelmonkey>:D
Not riding in this wonderful Oklahoma weather? --Mike D.
gotta love Air tools, Blipblip with the Air Impact gun and thathathathats all folks.