Print Page - Will these work on a GS500?

Title: Will these work on a GS500?
Post by: ConanLloyd on March 02, 2005, 10:34:14 AM

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4531812469&category=34284

Title: Will these work on a GS500?
Post by: Frost on March 02, 2005, 10:46:57 AM

are you talking about the lock or the gas cap?

Title: Will these work on a GS500?
Post by: dgyver on March 02, 2005, 11:32:12 AM

The Kat ignition will plug into the GS harness and from I have been able to tell is that most every Suzuki sport bike gas caps are compatible.

Title: Will these work on a GS500?
Post by: ConanLloyd on March 02, 2005, 11:44:25 AM

I'm basically trying to expand my options for replacing my lost keys. Locksmith wants $60 to cut a new one.

My current gas cap is kinda stiff and my seat lock is busted. If I could replace all 3 it would be cool

Title: Will these work on a GS500?
Post by: Frost on March 02, 2005, 11:45:58 AM

isnt' there a way of getting the vin number of some sort and get the key number from suzuki?

Title: The tank
Post by: The Buddha on March 02, 2005, 03:34:17 PM

OK tank cap and ignition will work with minor mods ... cap especially ... you'll need to swap the rivet pins ... the GS tank has a little button like bulge where the longest rivet pin it on a Kat cap If I remember ... but 2 min deal to swap.
Ignition is a direct fit and will plug in, but I believe (not totally sure) its top part is about 1/8th of an inch low ... as in the lock will be 1/8 inch sunk instead of being level with dash and triple ... but no other issues ... The seat lock will not fit from a Kat, you'll need a TL seat lock ... but I believe you dont have that anyway ... so you're cool ...
Cool.
Srinath.

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: ConanLloyd on March 02, 2005, 10:34:14 AM